Topic: Base gaskets with 110 cylinders (Read 6782 times)

HD Street Performance · « **Reply #15 on:** September 29, 2014, 09:27:32 AM »

Possible butted rings. Aftermarket mahle pistons are supplied with .005 os rings

HILLSIDECYCLE.COM · « **Reply #16 on:** September 29, 2014, 01:03:40 PM »

Rings that butt togather will break the ring.........not the piston.
That photo is from detonation........

98fxstc · « **Reply #17 on:** September 29, 2014, 09:42:35 PM »

................and chances are VERY good that at LEAST the exhaust valve(if not both valves) is buggered......
Scott

valves are ok (just)
bit of piston material gone out the exhaust valve , imbedded in seat and backface of valve, maybe a bit in guide as well

sadunbar · « **Reply #18 on:** September 29, 2014, 09:54:55 PM »

valves are ok (just)
bit of piston material gone out the exhaust valve , imbedded in seat and backface of valve, maybe a bit in guide as well

I'm not so sure that description qualifies as "ok (just)"...

98fxstc · « **Reply #19 on:** September 30, 2014, 12:16:43 AM »

valves are 'ok'
would probably clean up
but have new ones on the way

sadunbar · « **Reply #20 on:** September 30, 2014, 08:20:57 PM »

valves are 'ok'
would probably clean up
but have new ones on the way