Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JR]

I have spent over 1/2 hour searching for an old thread that told which wires need to be connected to allow spotlights on with high beam. I have the Kuryakyn front headlight modulator and it only works on high beam. I was wanting to incorporate the spots to come on with high beam. I remember someone using the front fender light wire not used on the SEEG to get power to spots. Anyone else remember this? [smiley=nixweiss.gif]

While I have your attention I have tour pak and saddlebag spoiler lights and I would like to make these into brake lights and turn signals I think Jim has done this to JC's scooter. Anyone help me out? Thanks in advance! [smiley=xyxthumbs.gif]

                                                                               JR [smiley=banana.gif]

[hd-dude]

Here is the latest on the spots:

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1164853053

For the spoilers you'll need the run/brake/turn module from HD. Than you'll have to hard wire them into the output side of the module. I'll get specific details on the color codes later today when I get home, don't know them all off the top of my head.

[JR]

Thanks Jim! [smiley=xyxthumbs.gif] You da man!

                                                                    JR [smiley=banana.gif]