Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[WTF Chuck]

I am looking for any info on the service menu in the 2014 and 2015 boom radio systems.
I was able to get to the menu but looking for info on each option in the menu.
Or better yet a service or shop manual on the boom box possibly set up info  from HD net
if such a thing exist  I think I got lucky with the choice i made and was able to reset the radio and Nav system to factory defualts but like to know what the rest of the stuff is. Any one in the know that can Help.

[bissjim]

This will help

http://boombox.harley-davidson.com

You can also do a search online, there's lots of information out there

Jim@hdbomm

[Boatman]

From the 99497-14 electrical toruing manual:

To enter the service menu:

1) Turn ignition off and wait 15 seconds
2) Press and hold power/mute button.  Turn ignition to accessory.
3) Continue to press power button for 2 seconds after warning screen is displayed.
4) Release power/mute button and accept warning

The service menu will display the following options:

1)  DTCS
2)  Audio  a) EG (serves no purpose)  b) Speaker test(s)
3)  Display  (test the LCD display briteness and color consistency)
4)  Key input   (test the faceplate hard keys, handlebar switches, and passenger controls)
4)  Component menus (XM and Satellite Digital Audio Radio Service)
     a)  Module version-displays the XM versions
     b)  Subscription info
     c)  Signal status
     d)  XM antenna state (unsupported, detected, not detected, short, and unknown)
     e)  Tone generation  (allows for generating left or right audio tone generated by the xm 
          module)
     f)   Navigation setting (no diagnostic value)
     g)  GPS status (displays a graphical representation of GPS satellite position&signal strength)
     H)  Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.   
          If the signal is unavailabe or out of range, the display may show dashes instead of a   
          value.
     I)   Compass indicates current direction
5)  Version information (sub menus show navigation and database versions but offer no diagnostic
     help.
6)  Reset 
     a)  Precalibration reset-restores factory settings-recommended when there are no problems or
          DTCS..
     b)  Post calibration save-Archives customer settings after post calibration reset
     c)  Post calibration reset-Resets radio default settings and restores customer data stored in
          post calibration save
     d)  Privacy reset-clears private data (phone pairing, phone #'s, presets, navi history)
7)  Touchscreen Calibration 6.5 only
     Calibrate the touchscreen by pressing the center of the displayed target.  The target moves 
     to a new location on the screen after each press for a total of 3 presses.  Press accept
     for the calibration to update.

This is all it says Chuck.  Now please get us a useable XM and FM..          
     

 
 

[Boatman]

Follow these steps when performing a precalibration reset:

1)  turn ignition and radio on

2)  Record all am and fm presets

3)  Enter service menu as stated in previous post

4)  Enter reset tab

5)  Enter precalibration reset tab

6)  When prompted with "restore factory defaults", enter "yes"

7)  When prompted with the warning screen, enter "accept".  This completes the reset.

  Verify the radio reset cleared the system.

9)  Set clock and enter all recorded presets.

[Boatman]

Maybe this is not what you wanted Chuck but this is all I found.  Remember, I haven't even used the gps yet so not computer literate like you-Bob

[WTF Chuck]

Great info  that's what  I was looking for Boatman. I will have to get that manual.