Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[vinver]

Hello

Picked my bike up today and I tried to import some waypoints into my boombox navigation system. They seem to have imported but i cannot select them nor can I delete them. They just sit there. I can only imagine that the software I used to create the waypoints is not quite compatible (perhaps colons and commas).

I need to know how I can get rid of these waypoints or how I can reset the whole boom box unit. In the manual it say that only the dealer can do a reset. I called them but they appear to have no idea.

Anyone here who can assist

Thank you

Vincent

[WTF Chuck]

To enter the service menu:

1) Turn ignition off and wait 15 seconds
2) Press and hold power/mute button.  Turn ignition to accessory.
3) Continue to press power button for 2 seconds after warning screen is displayed.
4) Release power/mute button and accept warning

The service menu will display the following options:

1)  DTCS
2)  Audio  a) EG (serves no purpose)  b) Speaker test(s)
3)  Display  (test the LCD display briteness and color consistency)
4)  Key input   (test the faceplate hard keys, handlebar switches, and passenger controls)
4)  Component menus (XM and Satellite Digital Audio Radio Service)
     a)  Module version-displays the XM versions
     b)  Subscription info
     c)  Signal status
     d)  XM antenna state (unsupported, detected, not detected, short, and unknown)
     e)  Tone generation  (allows for generating left or right audio tone generated by the xm
          module)
     f)   Navigation setting (no diagnostic value)
     g)  GPS status (displays a graphical representation of GPS satellite position&signal strength)
     H)  Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.   
          If the signal is unavailabe or out of range, the display may show dashes instead of a   
          value.
     I)   Compass indicates current direction
5)  Version information (sub menus show navigation and database versions but offer no diagnostic
     help.
6)  Reset
     a)  Precalibration reset-restores factory settings-recommended when there are no problems or
          DTCS..
     b)  Post calibration save-Archives customer settings after post calibration reset
     c)  Post calibration reset-Resets radio default settings and restores customer data stored in
          post calibration save
     d)  Privacy reset-clears private data (phone pairing, phone #'s, presets, navi history)
7)  Touchscreen Calibration 6.5 only
     Calibrate the touchscreen by pressing the center of the displayed target.  The target moves
     to a new location on the screen after each press for a total of 3 presses.  Press accept
     for the calibration to update.

[BigLew55]

I have had trouble when I imported duplicates.  The unit didn't like it, and I couldn't figure out how to even delete them.  The unit would not select either version of the duplicates.

I ended up doing a reset.  Now I am more careful because it was a bit of a pain.

[vinver]

Thank you. That did the trick and I have saved your procedure for future reference.

Only thing now is to figure out how I can import my collection of waypoints