Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[aclass]

Interested in what type of adhesive tape might exist that will allow you to reuse the flush mount trim ring around the gas cap.
I would hate to have to spend 200 bucks for a new set.

[skratch]

3m trim adhesive tape.

[steveltd]

Mine came loose a while ago, all I did was clean the old adhesive off and use a couple dabs of gorilla glue. No problems since!

[donvito]

I was going to replace my ring because it has dings from the original owner. I think its only $10 for a new ring, the cap is almost $100. therwise 3M VHB tape is the stuff to use.

[aclass]

I was going to replace my ring because it has dings from the original owner. I think its only $10 for a new ring, the cap is almost $100. therwise 3M VHB tape is the stuff to use.

  Thanks for the info donvito,  That's good to hear.

[SE-Mike]

Thanks for the info donvito,  That's good to hear.

I agree with donvito, this is the stuff to use. It comes in different thicknesses and can be purchased through McMaster Carr

[dirtdobber]

I used silicone. Still holding after a year.
A little dab will do yea.