Hey! Guy's
I've been looking at the new split-Vision Mirror #92190-06 Does anybody have them yet! Or whats the thought !! [smiley=nixweiss.gif]
Don [smiley=cherry.gif]
Don, I had them on for a few weeks and took them back off to return for refund. They've got a fitment issue.
The mirror part is actually pretty slick. And I think they'd work very cool if you could adjust them where you needed. Problem is you can't (or at least I couldn't).
The arm on our stock mirrors is mostly founded. The arm on these new mirrors is generally rectangular in shape. It's also much larger in outside diameter down where the master cylinders are than our stock mirrors. That's where the problem comes in.
Before you can deflect the mirrors as far outboard as you'd like for best rear vision that rectangular arm comes in contact with the master cylinders. You can push them close to where you want them. But they just won't quite get there.
I tried loosening the heads and every other thing one might normally (or abnormally) do. And the damn things just won't adjust out quite far enough. If they had same arms as our stock mirrors do, or an arm that was just smaller in diameter in its lower half, they'd work find. As they're made right now, however, the silly things just won't go where you need them to.