Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[CVO Couple]

I installed the accy. switches on the left side and all went well. I installed a switch on the right side next to the power lock buttons and it works and has output in the accy. plug but the switch faces upside down due to the way the switch bodys mount from underneath. Wonder if HD makes a switch that faces correctly.

[Mandrew13]

I installed the accy. switches on the left side and all went well. I installed a switch on the right side next to the power lock buttons and it works and has output in the accy. plug but the switch faces upside down due to the way the switch bodys mount from underneath. Wonder if HD makes a switch that faces correctly.

I also ordered the single button from the left hand kit. So, that explains why the part name specified "LH."  Maybe I'll try blacking or removing the print so that you can't tell it is on upside down.

[CVO Couple]

Has anyone tried to remove the lettering from their accy. buttons?

[CVO Couple]

Going to buy the left side light switch and put it in the right side switch pack. No more upside down ACCY.

[OBB]

For anyone else adding the dual switch setup on the left side like I did.... There's 2 connections on the harness that plugs into the connector under the left side cover. One takes the standard old Accy plug that you splice your adapter into for anything over 2 amps, the other pigtail is just 3 wires which are red, blue and black. THAT RED WIRE IS CONSTANT HOT EVEN WITH THE BIKE TURNED OFF. I couldn't find anything in the instructions about it but when wiring up my leds, I figured it out. You need the blue one for switched power.

[CVO Couple]

Its hot for if you want to add a relay for accys over 2 amps like the other circuit.