www.CVOHARLEY.com
CVO Social => Pictures => Topic started by: Chief on November 15, 2007, 08:43:19 AM
-
I'm working with a painter on the new design for my 07 and I would like to be able to show him good examples of CVO Electra Glides that came before 2007.
I'm looking for good hi-res shots of the front, rear and side with any other shots spotlighting the details, pin striping etc.
I'm looking for shots of the 2004 - 2006 models in all available colors.
Show me what ya got.
Thanks.
:indian_chief:
-
I'm working with a painter on the new design for my 07 and I would like to be able to show him good examples of CVO Electra Glides that came before 2007.
I'm looking for good hi-res shots of the front, rear and side with any other shots spotlighting the details, pin striping etc.
I'm looking for shots of the 2004 - 2006 models in all available colors.
Show me what ya got.
Thanks.
:indian_chief:
Alrighty Then!
-
.
-
,
-
.
-
.
-
.
-
.
-
Perfect. Thanks. Any closeups of the tank emblem?
:indian_chief:
-
.
-
Close
-
Chief,
I think you're just trying to confuse everyone with paint selection! Let's see, "Wow, that's the first '04 I've seen with a 110". In any event, I think it will be a great choice. The '07 paint schemes never blew me away, but that's just my opinion, others love it! Also, just my opinion, but the '04-'05's were the best looking CVO bikes the MoCo ever built! I do love the newer bikes, but something about those paint schemes from '04-'05 still grab me. I guess they did you too! Of course, any of the '06 paint schemes would work perfectly with your leather TP. Good luck with the paint selection. Sure look forward to seeing the project progress! BTW, we had an awesome time in N.GA and really enjoyed meeting you and Pinkie!
Craig
-
.
-
Paint it Black, you Devil! ;D
Hoist! 8)
-
Tank Emblem. Pictures just don't do this pallette any justice tho'. Hope this helps, Chuck. Best to ya with this venture. Whatever you end up doing, I'm certain it will be spectacular. :2vrolijk_21: :2vrolijk_21:
-
Thanks guys. Now, where are the 2004 and 2005 pics? Bueller? Bueller?
:indian_chief:
-
Here is a thread - Fired00d's Digital Camera (http://www.cvoharley.com/smf/index.php?topic=5997.0) with some pics of my pumpkin.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Chief,
I think you're just trying to confuse everyone with paint selection! Let's see, "Wow, that's the first '04 I've seen with a 110". In any event, I think it will be a great choice. The '07 paint schemes never blew me away, but that's just my opinion, others love it! Also, just my opinion, but the '04-'05's were the best looking CVO bikes the MoCo ever built! I do love the newer bikes, but something about those paint schemes from '04-'05 still grab me. I guess they did you too! Of course, any of the '06 paint schemes would work perfectly with your leather TP. Good luck with the paint selection. Sure look forward to seeing the project progress! BTW, we had an awesome time in N.GA and really enjoyed meeting you and Pinkie!
Craig
Craig,
Honestly I'm not trying to cause trouble here, just trying to gather as much info for the painter as I can. I started out thinking I knew what I wanted, but after looking at some of the jobs he's done, I realized that he is an artist and the last thing an engineer should do is direct an artist. I'm really looking forward to seeing what ideas he comes up with.
I've seen a bunch of helmets he's painted and we're going to let him paint Pinkie's Nolan in some way cool design that is special to her.
:indian_chief:
-
Here is a thread - Fired00d's Digital Camera (http://www.cvoharley.com/smf/index.php?topic=5997.0) with some pics of my pumpkin.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
That's great Gary. Many thanks.
:indian_chief:
-
Here is a thread - Fired00d's Digital Camera (http://www.cvoharley.com/smf/index.php?topic=5997.0) with some pics of my pumpkin.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Aw c'mon d00d, post some here...............
-
Craig,
Honestly I'm not trying to cause trouble here, just trying to gather as much info for the painter as I can. I started out thinking I knew what I wanted, but after looking at some of the jobs he's done, I realized that he is an artist and the last thing an engineer should do is direct an artist. I'm really looking forward to seeing what ideas he comes up with.
I've seen a bunch of helmets he's painted and we're going to let him paint Pinkie's Nolan in some way cool design that is special to her.
:indian_chief:
This is the helmet I wear when I ride the Sporty. I think it's pretty friggin' kewl. At almost every redlight, I get a "AWESOME HELMET" compliment. They give a chit or two less about the Sporty. :huepfenlol2:
-
Another
-
Last one. Right side is symetrical.
-
two different 04's
-
Aw c'mon d00d, post some here...............
They are here....... on the site. :huepfenlol2: Plus most of those pictures are old and don't show all the new chrome. I would hate for anybody to think the "King Of Chrome" was slacking on the job. ;)
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
This was taken at Harley's 100th
-
top of tour pack
-
.
-
.
-
They are here....... on the site. :huepfenlol2: Plus most of those pictures are old and don't show all the new chrome. I would hate for anybody to think the "King Of Chrome" was slacking on the job. ;)
:pumpkin:
Ride Safe,
Fired00d
:fireman:
D00d, you know we know better than that. ;D Perhaps some updated pictures are in order. Would be nice to see some of your latest artistic efforts. PLEASE!!!!!!!!! ;D
-
.
-
.
-
.
-
.
Ah.........the Red Bike!!! Such an awesome and beautiful machine. :2vrolijk_20: :2vrolijk_20: :2vrolijk_20: :2vrolijk_20: :2vrolijk_20:
-
.
-
.
-
.
-
.
-
.
-
.
-
Ah.........the Red Bike!!! Such an awesome and beautiful machine. :2vrolijk_20: :2vrolijk_20: :2vrolijk_20: :2vrolijk_20: :2vrolijk_20:
:2thumbsup: Thank you Henry :2thumbsup:
-
D00d, you know we know better than that. ;D Perhaps some updated pictures are in order. Would be nice to see some of your latest artistic efforts. PLEASE!!!!!!!!! ;D
I'll try to get some next time I get it out it's raining here today. Most of the newest additions are little things.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
I'll try to get some next time I get it out it's raining here today. Most of the newest additions are little things.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
It's been my experience that details speak volumes..........and with your canvas approaching full circle, the details tell a completely different story and give lesser mortals like me needed inspiration when brainlock.........a frequent happening..........occurs. :P
-
Here is a recent one that Terry took this summer. I've since added the Chrome Oil Filler Spout.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
I think this thread will go for a while. Don's bike is so brite that his engine thinks it's painted too. :)
-
Hey Chief, if you really interested in getting rid if the rivets in the front fender and don't want to get a new fender, here's one that's been welded up. Just need to make the brackets and spray with weld thru primer. Just needs to be ground down.
-
Hey Chief, if you really interested in getting rid if the rivets in the front fender and don't want to get a new fender, here's one that's been welded up. Just need to make the brackets and spray with weld thru primer. Just needs to be ground down.
Thanks Talon,
That's where I'm headed, SMOOOOOOOOOOOOOOOOOOOOOOOOOTH.
:indian_chief:
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
!
-
Wow Bob, that Jalapeno sure is purdy!!!!! :2vrolijk_21: :2vrolijk_21: Of the SEEGs, that is my favorite.
-
!
-
.
-
!
-
Wow Bob, that Jalapeno sure is purdy!!!!! :2vrolijk_21: :2vrolijk_21: Of the SEEGs, that is my favorite.
Thanks Henry, I like it too! :2vrolijk_21:
-
!
-
Last one, I promise!
-
This is great guys. Thanks a lot. Now, how about some Huckleberry shots?
:indian_chief:
-
Thanks for the great pics Bob. This one really shows the stripes well.
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=18040.0;attach=48330;image)
:indian_chief:
-
By special request:
-
.
-
.
-
By special request:
Must stop looking at this thread. Slobberin' on my keyboard..............BAD! Wanting to spend money...............BAD! But these are some damn fine scooters. Really like the Huck but that Jalapeno has my heart. :smitten:
-
.
-
.
-
.
-
.
-
Must stop looking at this thread. Slobberin' on my keyboard..............BAD! Wanting to spend money...............BAD! But these are some damn fine scooters. Really like the Huck but that Jalapeno has my heart. :smitten:
It seems that the Jalapenos are the least seen out of all the SEEG's. :nixweiss: Definitely a nice one to have. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
At this rate I might take over 3rd spot again? :nixweiss: :huepfenlol2:
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
.
-
Someone told me there are some SEEGs in this picture. :nixweiss:
-
Your Huckleberry is beautiful Brian. :2vrolijk_21:
-
Your Huckleberry is beautiful Brian. :2vrolijk_21:
Was thinking the same thing when I saw the photos of your '05, Bob. I think this is going to be one of my favorite threads, getting to see all these great SEEGs and Ultras! :huepfenjump3: :2vrolijk_21:
-
Someone told me there are some SEEGs in this picture. :nixweiss:
That's a creative way to "Glare" the fender. Was that on the bottle? :D
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=18040.0;attach=48390;image)
:indian_chief:
-
Tbone
Your 05 is beautiful!
As time wears on the stock appearing bikes look the best!
Congrats to you for keeping it so nice and clean.
S
/
B
:2vrolijk_21:
-
Please correct me if I'm wrong, but the only difference I see between the 04's and the 05's is the two-tone lowers on the 04's. Is that the difference in the paint design?
:indian_chief:
-
Tbone
Your 05 is beautiful!
As time wears on the stock appearing bikes look the best!
Congrats to you for keeping it so nice and clean.
S
/
B
:2vrolijk_21:
Thanks Chip, she's my baby for sure. I'm thinking my next project for the 05 is going to be wheels and rotors.
-
Please correct me if I'm wrong, but the only difference I see between the 04's and the 05's is the two-tone lowers on the 04's. Is that the difference in the paint design?
:indian_chief:
Yeah, pretty much. The '04s had the previous style lowers on them and did not have as large an opening on the side, so it permitted a little more creativity with the paint scheme. '05s and up have solid colors.
-
Please correct me if I'm wrong, but the only difference I see between the 04's and the 05's is the two-tone lowers on the 04's. Is that the difference in the paint design?
:indian_chief:
I believe you are correct, and the reason I think they left the '05's one color is because they were vented. Not sure how paint would have looked/lasted w/that plastic painted constantly moving back and forth inside the lowers.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Gary A.K.A. OCDooderator, cant believe you let all those guys with the other colors & flavors out do The True H-D Color. :pumpkin: :confused5:
-
Gary A.K.A. OCDooderator, cant believe you let all those guys with the other colors & flavors out do The True H-D Color. :pumpkin: :confused5:
:zroflmao: :zroflmao:
-
Gary A.K.A. OCDooderator, cant believe you let all those guys with the other colors & flavors out do The True H-D Color. :pumpkin: :confused5:
I posted one picture and a link to a thread w/a bunch more. Didn't want to show off take up to much bandwidth. ;D
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
I posted one picture and a link to a thread w/a bunch more. Didn't want to show off take up to much bandwidth. ;D
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Oh come on, Gary. Why would you NOT want to dote on your Pumpkin? I think we all enjoy seeing the latest and greatest OCD crack. Post some pictures, D00d! Gee Whiz!!!!! :huepfenlol2: :huepfenjump3:
-
RJOB-
Good job on the rear fender with the led's like a street glide. I've seen them on a couple of bikes in chrome and I really didn't care for it. But your's really fits the bike and looks kick@. I wish they would paint one for my :bananarock:!!! Speaking of which their are no banana's out her yet. I'll post mine when I get to work. Still trying to figure out this imac, now she wants an iphone! wtf!
-
I got a note from the painter saying that he really appreciates all of the pictures of the different bikes.
Thanks everyone.
:indian_chief:
-
RJOB-
Good job on the rear fender with the led's like a street glide. I've seen them on a couple of bikes in chrome and I really didn't care for it. But your's really fits the bike and looks kick@.
Thanks Mike, I lucked out with the black set up. I actually got it on there before they brought out the kit and it is definitely one of the features that draws me to the Street Glide for a third bike. Just wish they'd make a SE version.
Everytime I sit down to do a build I get stuck on the SE starter kit bikes when I see what I've done to my SEUC. By the time I get all the OCD crap I like I may as well go SE. So I am thinking I'll wait until mid-summer to see if they bring out a Street Glide and if not I think I'm dropping back a year or two for an SEEG.
Seems it's the bike of choice for the site and I wouldn't want to be left out ::)
-
Was thinking the same thing when I saw the photos of your '05, Bob. I think this is going to be one of my favorite threads, getting to see all these great SEEGs and Ultras! :huepfenjump3: :2vrolijk_21:
Agreed! You guys have some beautiful bikes here! Something about those 04 and 05 SEEGs just kind of tugs at me. You guys are definitely causing some trouble here! LOL. Gorgeous bikes for sure. Chief, thanks for asking for all of these great photos for the rest of us to drool over.
-
here's a banana...
-
the tank...
-
Hey Chuck, here is a picture to find something to base a paint scheme on.
Hint: (Look at the second shelf from the top, far right side.) :2vrolijk_21:
-
Better shot:
-
Hey Chuck, here is a picture to find something to base a paint scheme on.
Hint: (Look at the second shelf from the top, far right side.) :2vrolijk_21:
I see it, and I'll make sure Pinkie does too. :2vrolijk_21:
I hope you enjoy it.
:indian_chief:
-
This is the helmet I wear when I ride the Sporty. I think it's pretty friggin' kewl. At almost every redlight, I get a "AWESOME HELMET" compliment. They give a chit or two less about the Sporty. :huepfenlol2:
Henry, fantastic job on the helmet! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: Who is the painter and where do I find him?
-
Henry, fantastic job on the helmet! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: Who is the painter and where do I find him?
Thanks, Mark. I bought it that way................but I know where you can get one just like it.
-
Henry, fantastic job on the helmet! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: Who is the painter and where do I find him?
Here's a helmet done by the painter that is doing the bike. Maybe he could do something with the Gold Wing helmet and make it something you'd like. :nixweiss:
It's all paint, no decals.
:indian_chief:
-
Thanks, Mark. I bought it that way................but I know where you can get one just like it.
Henry nice helmet...where did you get it?
-
Henry nice helmet...where did you get it?
Thank you, Mi Amigo, Jorge! The gentleman who built the engine on my SEUC got it for me.
-
Here's a helmet done by the painter that is doing the bike. Maybe he could do something with the Gold Wing helmet and make it something you'd like. :nixweiss:
It's all paint, no decals.
:indian_chief:
That is exactly what I was thinking. I like the fit of the helmet but the color is awful. Can you send me a contact email address or phone number for him? Thanks
-
Here's a helmet done by the painter that is doing the bike. Maybe he could do something with the Gold Wing helmet and make it something you'd like. :nixweiss:
It's all paint, no decals.
:indian_chief:
Wow! :shocked2: :shocked2: :shocked2: Who is this guy? That is incredible artwork! :2vrolijk_21: To be able to do those logos like that (with such authenticity) takes a great deal of talent! In fact, he may have had to be licensed by the companies to do it?!?
When can we expect some sketches to critique, Chuck? :nixweiss: I'm startin' to get excited about this with ya! :huepfenjump3:
-
Wow! :shocked2: :shocked2: :shocked2: Who is this guy? That is incredible artwork! :2vrolijk_21: To be able to do those logos like that (with such authenticity) takes a great deal of talent! In fact, he may have had to be licensed by the companies to do it?!?
When can we expect some sketches to critique, Chuck? :nixweiss: I'm startin' to get excited about this with ya! :huepfenjump3:
He is good, I'll give him that. Here's the sketch for the Lucky 7's helmet he did.
As far as sketches, maybe see something next week.
:indian_chief:
-
...and the finished helmet. The depth is amazing.
-
Wow! That's very nice, Chief. Looks like silver-leaf. I'm like Brian, I'm getting excited w/ you to see how this paint project progresses. :) har! spyder
-
Really cool, Chuck! Your bike will be like an "Xtreme CVO" when it's done! Can't wait to see some renderings! :2vrolijk_21:
-
Maybe different but it does have an eagle scheme.
-
fender
-
Hey Bubba, that's nice, was it painted to sell at a show? :-\ spyder
-
'04 w/o lowers
-
There have been some great photos on this thread. Of course the SEEGs seem to stand out in the crowd.......I just don't get tired of looking at them.
-
There have been some great photos on this thread. Of course the SEEGs seem to stand out in the crowd.......I just don't get tired of looking at them.
I'll agree with that, but I'll add that the SEUCs are also standing quite tall!!!! :2vrolijk_21: Although the SEEGs are very nice bikes...........VERY NICE, nothing catches my eye like a SEUC. And the Lucky 7s helmet.............WOW! Chuck, God Bless ya, Bro. You're chittin' in tall cotton right now with the fun you're having. Thanks so much for sharing, and I too, can't wait to watch this unfold. :2vrolijk_21:
-
Chuck,
It really looks like you've got yourself an awesome painter! Thanks for sharing this project with all of us here. It is going to be a lot of fun watching your new "Custom" progress. Can't wait to see the next step. Good luck with the project. I know it is going to be gorgeous!
-
Maybe different but it does have an eagle scheme.
Right colors too. Thanks Bubba.
:indian_chief:
-
Sunrise :huepfenjump3: :bananarock: :huepfenjump3:
-
Sunrise :huepfenjump3: :bananarock: :huepfenjump3:
Uh oh. TIme to put the sunglasses on! JR's posting photos of the 'nana!!! :huepfenjump3: :bananarock: :2vrolijk_21:
-
Uh oh. TIme to put the sunglasses on! JR's posting photos of the 'nana!!! :huepfenjump3: :bananarock: :2vrolijk_21:
Sunglasses ain't going to do it I went and got a welder's helmet. Come on JR show us that 'nanner. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Uh oh. TIme to put the sunglasses on! JR's posting photos of the 'nana!!! :huepfenjump3: :bananarock: :2vrolijk_21:
You sooo funny!!! Sure enough though, I have some pictures of my bright and beautiful banana!!! Someone screwed up big time asking for pictures of our scooters. This Thread ought to take me to 5000 posts when I'm done. :huepfenlol2: :nervous: :huepfenlol2:
Lucky for ya'll I have to run up to the church to distribute some food baskets for those going thru hard times. Maybe for Christmas we can start something similar for this website, only instead of food we can give out bags of CHROME!!! :o ;D :huepfenjump3: :bananarock: :2vrolijk_21: Yeah Baby!!!
-
Sunglasses ain't going to do it I went and got a welder's helmet. Come on JR show us that 'nanner. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Here ya go Gary....these are what I use!!! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
-
Are your nuts on in these photos? :nixweiss: :huepfenlol2:
-
Here ya go Gary....these are what I use!!! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Oh yea!! Just imagine the looks someone would get w/a pair of those on riding a :pumpkin: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Oh yea!! Just imagine the looks someone would get w/a pair of those on riding a :pumpkin: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Nobody ever notices I'm wearing them when I'm on my banana, their to busy looking at the wonderful rainbow of colors that is reflecting off my nana! :nixweiss: :bananarock:
-
Is that a speck of dust on JR's nana?
-
Never mind, it was on my screen. ;D ;D
-
By special request:
US 129, Cheoah Dam
-
Hey Don - Are you the only one to have followed my lead?
BTW, I had a problem with mine, I'll have to get the pics to show the repair.
-
I got yer CVO Glide pic right here :2vrolijk_21:
-
Not mine, but I what I would like done over the winter (similar)
-
Even Spyder preferes a Red bike deep down.
-
.
-
.
-
.
-
.
-
.
-
Hey Don - Are you the only one to have followed my lead?
BTW, I had a problem with mine, I'll have to get the pics to show the repair.
I think so. Haven't noticed any others anyway. Certainly prefer it over the little baby cover and ugly bolt we're given stock.
Had to do a fair bit of body and fender work to the cover to make it work with the six speed. When I finally got around to messing with it (how long did that take, a year?) it was maybe an hour long job one night of trips back and forth to the bench grinder and Dremel. When finally had the contour where it needed to be just dressed the edge and sprayed it with a good clear. Has held up so far without issue or discoloration.
What happened with yours? It looks so much better with that than without that even if it meant working over another it'd be worth it.
-
What happened with yours? It looks so much better with that than without that even if it meant working over another it'd be worth it.
It cracked around the trans cover boss. Probably from taking it on and off to check the trans oil (only when I changed the oil though)
I feel the same way with the way it looks and was ready to go out and buy a new one, till I got out the die grinder.
-
It cracked around the trans cover boss. Probably from taking it on and off to check the trans oil (only when I changed the oil though)
I feel the same way with the way it looks and was ready to go out and buy a new one, till I got out the die grinder.
There were a couple of subtle differences on mine compared to what you'd described with yours. Probably because fo the six speed. My line cleared ok. My dipstick did to. So once the body and fender work was done I didn't have to have it on and off as yours required. Will keep my fingers crossed and assume I won't run in to the same problem :2vrolijk_21: .
-
SpyderPsychle
-
SEEG w/ lowers on......
-
SpyderPsychle (48K mi. = needs new chrome/paint)
-
Hey Bubba, that's nice, was it painted to sell at a show? :-\ spyder
Hey Spyder sorry I did not see your question... It was last year 2006 at Bikes Blues and BBQ. I will have to go back throu my cards and find the painter name..... Cant remember the company
~bubba~
-
SEEG w/ lowers on......
I don't care who you are, that's a good-lookin' motorsickle right there! :2vrolijk_21:
-
'glared' saddlebags in Starlight Black
-
'glared' saddlebags in Starlight Black
Ok....put your sunglasses back on, it's sunrise on the nana! :huepfenjump3: :drink: :bananarock:
-
.
-
.
-
Walking In Memphis....
-
.
-
.
-
.
-
dont forget hanging in the valley with a wannabe glide
-
Oh Yeah....MV :2vrolijk_21: I like this one of Grover!
-
.
-
JR's having such a good time posting his pics, he didn't realize he passed 2500 posts hours ago! ;D
Way to go JR! Congrats man! Your one special person! :2vrolijk_21:
Hoist! 8)
-
JR's having such a good time posting his pics, he didn't realize he passed 2500 posts hours ago! ;D
Way to go JR! Congrats man! Your one special person! :2vrolijk_21:
Hoist! 8)
Yeah I sure did!!! :huepfenlol2: And like I said in an earlier post in this thread...I'll have 5000 post by the time I'm finished hear... Just a Kiddin!! ;D
Were going to modify 103T scooter like this in about 30 yrs.
-
Yeah I sure did!!! :huepfenlol2: And like I said in an earlier post in this thread...I'll have 5000 post by the time I'm finished hear... Just a Kiddin!! ;D
Were going to modify 103T scooter like this in about 30 yrs.
Ha, ha! Just the other day I was talking to Mrs. 103t about adding a matched side hack when that time comes.! :2vrolijk_21:
-
Forget a trike at old age...I've already got a custom painter working on a B&O casket for me. It'll have chrome bar right down the center. I'm thinking the LED light bar would be too much.
-
Forget a trike at old age...I've already got a custom painter working on a B&O casket for me. It'll have chrome bar right down the center. I'm thinking the LED light bar would be too much.
Only if they never owned a CVO!!! :pumpkin: :2vrolijk_21: ;D
-
I think so. Haven't noticed any others anyway. Certainly prefer it over the little baby cover and ugly bolt we're given stock.
Had to do a fair bit of body and fender work to the cover to make it work with the six speed. When I finally got around to messing with it (how long did that take, a year?) it was maybe an hour long job one night of trips back and forth to the bench grinder and Dremel. When finally had the contour where it needed to be just dressed the edge and sprayed it with a good clear. Has held up so far without issue or discoloration.
What happened with yours? It looks so much better with that than without that even if it meant working over another it'd be worth it.
TLR & Porthole --
I was just talking to some friends today about adding this piece. Could y'all be a bit more specific on the alterations you had to make? I wanted to start on Candy's SEEG, it has the stock tranny, any new tools I will need prior to attempting this? :nixweiss: Please advise! :2vrolijk_21:
-
TLR & Porthole --
I was just talking to some friends today about adding this piece. Could y'all be a bit more specific on the alterations you had to make? I wanted to start on Candy's SEEG, it has the stock tranny, any new tools I will need prior to attempting this? :nixweiss: Please advise! :2vrolijk_21:
With the stock tranny it's different than mine so best let Duane cover the details. What he'd told me generally before though was that the cover bolted on. It partially obstructed the tranny dipstick so had to be removed at time of transmission service. Also I believe he had to tweak (bend) the hydraulic line just a bit to gain room for the cover to go in and out. How much bending or greater detail will be left to Duane.
On the six speed you actually have to work the cover over quite a bit. A fair bit of metal is removed. But once it's done there is no problem with the line or blockage of the dipstick. So it can stay on forever.
-
Here's my SERK converted to a EG! ::) ;D ;)
Hoist! 8)
-
It's a sleeper, it's in disguise! Undercover CVO by Hoist!
-
Here's some more; taken today, since I finally got her all cleaned up.
-
Thanks, Ken and Cheri. You guys ROCK! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
-
I love this paint. When it's right..........and clean..........I melt. :)
-
.
-
.
-
Last one for now. Flash just doesn't work well indoors, and I shake too much to take good pictures without flash. I had what I thought was a good picture of the right side of the engine with the R&R cam plate.............but it was blurred. I'll get some pictures in sunlight and post.
-
Henry?
Is that a squashed bug on the inside of your fairing??
He'll be looking for hours now. hehehehe
-
Thanks, Ken and Cheri. You guys ROCK! :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
I like it!!!! Is that another bug?
Cheri loves it!! Not the bug though.
-
Henry?
Is that a squashed bug on the inside of your fairing??
He'll be looking for hours now. hehehehe
Chit....................WHAT? Dammit. Better go look. See y'all tomorrow.
This'll make me insane if I don't find these friggin' squashed bugs. ;)
-
Since it's been so nice here the last couple of days (in the 70's) I've been able to get out do some riding and get some updated pictures.
First I'd like to apologize if there are any bugs/debris or anything else found on my bike. We've been under water restrictions for several months and I've not been able to wash/detail it. :(
Starting w/left side..
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Close up of motor left side...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Left saddlebag..
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Front...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Close up of paint on front fairing..
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Right side..
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Close up motor right side...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Right saddlebag...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
View of cockpit....
Note the guy in the mirror following me taking pictures. :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Tank...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Close up of tank...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Another of fairing...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Last one front fender...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Last one front fender...
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Gary, two words: Fender Spear. 8)
-
Gary, two words: Fender Spear. 8)
I have seen those on yours, Terry's and others, but it just hasn't floated my boat yet. Even though it is chrome it just hasn't reached out to me and said "you got to have it". I'm more of a chrome on motor type person then I'm chrome on painted surfaces. :nixweiss: If it had not been for some bubbling around the windshield/fairing screws I doubt I would have that piece of chrome on the fairing.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Here is one of mine custom painted bike while at a Patriot Guard Service
-
Here is one of mine custom painted bike while at a Patriot Guard Service
Ozzie,
Noticed the derby cover and not sure if I had none this about you before.... Semper Fi!! :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Still Faithful...Staying in touch with Honor to my friends and countrymen. I rarely say much about that time. Good Eye there Marine. Semper Fi! :coolblue:
This bike was at the HD in Orange VA.
-
I have seen those on yours, Terry's and others, but it just hasn't floated my boat yet. Even though it is chrome it just hasn't reached out to me and said "you got to have it". I'm more of a chrome on motor type person then I'm chrome on painted surfaces. :nixweiss: If it had not been for some bubbling around the windshield/fairing screws I doubt I would have that piece of chrome on the fairing.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
I don't like the sound of that... :nervous:.....what do you think caused it? :-\spyder
-
I don't like the sound of that... :nervous:.....what do you think caused it? :-\spyder
I was told by dealer that it came from overtightening the screws that hold windshield. Just the clear bubbled and it is not noticeable w/the chrome strip on there now. :2vrolijk_21: For those that put either one of the chrome strips offered by the MoCo on there bikes new more then likely will not see this problem because it spreads the pressure/clamping force over a wider area.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Gary, I don't want to hear any more chit about how clean I keep my bike, Bro. :huepfenlol2: :huepfenjump3: For not being able to wash your bike for months on end, the Pumpkin looks GREAT! Awesome job. And about that spear...........I think it looks great............on someone elses bike, but not mine. My Father-In-Law has it on his RG, and it looks good there, but it doesn't do anything for me when visualized on my front fender.
So..........what is your secret to a clean bike during water restrictions? :nixweiss:
-
Gary, I don't want to hear any more chit about how clean I keep my bike, Bro. :huepfenlol2: :huepfenjump3: For not being able to wash your bike for months on end, the Pumpkin looks GREAT! Awesome job. And about that spear...........I think it looks great............on someone elses bike, but not mine. My Father-In-Law has it on his RG, and it looks good there, but it doesn't do anything for me when visualized on my front fender.
So..........what is your secret to a clean bike during water restrictions? :nixweiss:
Thanks. :2vrolijk_21:
I wipe the bike down after each ride w/an Absorber Chamois to get the bugs off, then wipe down w/Microfiber cloth to get rid of streaks. Before riding I'll use a California Duster to get any dust that settled on it while sitting that's about it. :nixweiss:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Yea we have a serious water drought here in Georgia so the dealership wont even wash mine after servicing or after the put my wheels on next Friday. I might have to get out there at 2am and do it secretely. Or put a drain in my garage. Anyways my buddy just got his street glide home after some mods so I figured this would be an appropriate place to post since it has custom paint.
-
another, paint wheels, suspension, rear fender, etc.
-
the rear...
-
BTW looks good dood, I'm jealous of the chrome! Is that your personal photographer in the mirror? Thought about changing my air cleaner as well, but I want to keep some yellow in it. i may just put the insert on there without sourrounding piece.
-
BTW looks good dood, I'm jealous of the chrome! Is that your personal photographer in the mirror? Thought about changing my air cleaner as well, but I want to keep some yellow in it. i may just put the insert on there without sourrounding piece.
Thanks. Whatever I do I just can't seem to shake that photographer he follows me around everywhere. If not him his shadow. ;)
I didn't really like the bland looking football shaped A/C cover that came on my bike, and since I could get the matching A/C cover and horn cover I switched. I do like the look of those that have switched there '05's to just the insert w/o the surrounding piece. To top that I've seen a melon (displacing air's) w/a green filter. It would be awesome if you could find a yellow filter. :bananarock:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
You have given me a new mission! The hunt is on.
-
hey D00d......happy Thanksgiving. And, just wondering if those nuts on the bottom of your front forks (axle retainer caps) are chrome or not.....maybe the light is playing tricks on me in that front fender photo, but it appears that you have 'missed' a chrome opportunity. :o har! :huepfenlol2: spyder
-
hey D00d......happy Thanksgiving. And, just wondering if those nuts on the bottom of your front forks (axle retainer caps) are chrome or not.....maybe the light is playing tricks on me in that front fender photo, but it appears that you have 'missed' a chrome opportunity. :o har! :huepfenlol2: spyder
Tee hee hee hee :huepfenjump3: :orange: :huepfenjump3: :orange: :huepfenjump3: :orange: :huepfenjump3: :orange:
-
hey D00d......happy Thanksgiving. And, just wondering if those nuts on the bottom of your front forks (axle retainer caps) are chrome or not.....maybe the light is playing tricks on me in that front fender photo, but it appears that you have 'missed' a chrome opportunity. :o har! :huepfenlol2: spyder
Happy Thanksgiving to you too Bro. :drink:
Those nuts are the stock and not chrome I believe (chit something else I now have to get). I did add the chrome wheel spacers though.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Happy Thanksgiving to you too Bro. :drink:
Those nuts are the stock and not chrome I believe (chit something else I now have to get). I did add the chrome wheel spacers though.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Gary, I've been waiting a long time for you to notice those. Now someone else has gone and pointed them out. Ok, since your in this mode; what other little things have also been missed ::) ?
-
Gary, I've been waiting a long time for you to notice those. Now someone else has gone and pointed them out. Ok, since your in this mode; what other little things have also been missed ::) ?
I don't know why you didn't mention it you never hesitated before. ;) This could be remedied for under $10.00 guess I'll be getting this taken care of soon - Chrome Fork Axle Retainer Nut Kit P/N 45813-03 (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524446435521&FOLDER%3C%3Efolder_id=2534374309218098&ASSORTMENT%3C%3East_id=2534374309218098&bmUID=1195757014553&bmLocale=en_US) while I'm at it I'll have to check and see if I need these - Chrome Fork Slider Drain Screw Kit P/N 45848-03 (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524447507067&FOLDER%3C%3Efolder_id=2534374309218098&ASSORTMENT%3C%3East_id=2534374309218098&bmUID=1195755193049&bmLocale=en_US) also.
There are still a few little things that I need to add some here that haven't decided if I want to add or not, and some I need to purchase.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Still Faithful...Staying in touch with Honor to my friends and countrymen. I rarely say much about that time. Good Eye there Marine. Semper Fi! :coolblue:
This bike was at the HD in Orange VA.
Ozzie,
Did you and Duane sneak into Waugh's on your recent trip down south? This dealership is about 20 minutes from me, and I visit there often. I believe this may have been one of "Big Daddy Don Waugh's" personal bikes.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Gary, I've been waiting a long time for you to notice those. Now someone else has gone and pointed them out. Ok, since your in this mode; what other little things have also been missed ::) ?
Now, I really wasn't trying to start anything.......just not sure if Gary had over-looked a really easy correctable upgrade......not expensive, but right up-front to cause the most desireable good 1st impression. And YES, D00d, the chrome drain screw is needed if not already in there. :orange: :orange: :orange: :coolblue: :coolblue: :coolblue: Har! :drink:spyder
-
Now, I really wasn't trying to start anything.......just not sure if Gary had over-looked a really easy correctable upgrade......not expensive, but right up-front to cause the most desireable good 1st impression. And YES, D00d, the chrome drain screw is needed if not already in there. :orange: :orange: :orange: :coolblue: :coolblue: :coolblue: Har! :drink:spyder
Spyder, don't tell him that when he pulls the old screw out all the fork oil is going to wizz out on the ground :o .
-
Spyder, don't tell him that when he pulls the old screw out all the fork oil is going to wizz out on the ground :o .
I already thought about that and I'm not going to do it. It will be done at next service.....
/me was born in the day, but it wasn't yesterday. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Spyder, don't tell him that when he pulls the old screw out all the fork oil is going to wizz out on the ground :o .
Hey D00d, don't you believe him..........as 'quick' as you are, only a p00f of orange dust will come out before the chrome screw fills that hole. :pumpkin: har! spyder
-
Hey D00d, don't you believe him..........as 'quick' as you are, only a p00f of orange dust will come out before the chrome screw fills that hole. :pumpkin: har! spyder
Are you telling me that Don would pull my leg?? :shocked2: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Ozzie,
Did you and Duane sneak into Waugh's on your recent trip down south? This dealership is about 20 minutes from me, and I visit there often. I believe this may have been one of "Big Daddy Don Waugh's" personal bikes.
Hey Gary,
Glenn was in that area in May for the HOG Group pre ride for Gatlinburg, In August for the HOG Gatlinburg ride, September for the High Octane Ride and then in October for the MV ride.
The stop wasn't on the August or October ride
-
Hey Gary,
Glenn was in that area in May for the HOG Group pre ride for Gatlinburg, In August for the HOG Gatlinburg ride, September for the High Octane Ride and then in October for the MV ride.
The stop wasn't on the August or October ride
Ok, thanks. Hopefully when he reads my post he'll know whenever he's in the area again to let us Virginians know about it.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Ok, thanks. Hopefully when he reads my post he'll know whenever he's in the area again to let us Virginians know about it.
Actually, for the last trip I posted multiple times what our plans were for MV, but it seemed that we were leaving too early for everyone else going. And I just didn't know where you were. But in our defence, doing Skyline Drive was a last minute route change (one of many)
-
Actually, for the last trip I posted multiple times what our plans were for MV, but it seemed that we were leaving too early for everyone else going. And I just didn't know where you were. But in our defence, doing Skyline Drive was a last minute route change (one of many)
I remember you mentioning about that, but no biggie I know how things can change. Now that you know how close I'm to SLD if you're ever back this way we can try to hook up. :2vrolijk_21:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
I remember you mentioning about that, but no biggie I know how things can change. Now that you know how close I'm to SLD if you're ever back this way we can try to hook up. :2vrolijk_21:
You know it
-
Where did you get the horn.
-
Which horn/picture?
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
The one with the 103 and eagle on it.
-
The one with the 103 and eagle on it.
I believe you are talking about these...
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=18040.0;attach=48239;image)(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=18040.0;attach=48811;image)
If so then that is the Air Wing Horn Cover P/N 69167-02A (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442270549&FOLDER%3C%3Efolder_id=2534374302446799&ASSORTMENT%3C%3East_id=2534374302446799&bmUID=1196036805424&bmLocale=en_US) with the Billet Air Cleaner Medallion Kit - Screamin' Eagle® 103 Cubic Inch P/N 29888-06 (http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442256675&FOLDER%3C%3Efolder_id=2534374302287057&ASSORTMENT%3C%3East_id=2534374302287057&bmUID=1196037069411&bmLocale=en_US) stuck on it.
:pumpkin:
Ride Safe,
Fired00d
:fireman: