Topic: Air cleaner cover 2 (Read 6330 times)

HWYMAN1 · « **Reply #30 on:** June 25, 2007, 08:39:26 PM »

two together (sans chrome hardware)

HWYMAN1 · « **Reply #31 on:** June 25, 2007, 08:40:02 PM »

some modifications from original

HWYMAN1 · « **Reply #32 on:** June 25, 2007, 08:40:41 PM »

close up of scallop edge with "breather holes"

HWYMAN1 · « **Reply #33 on:** June 25, 2007, 08:44:03 PM »

Last was done as result of dyno tune, had to jim brown of bragging rights, learned two things: the V&H look and sound good but do not offer the same HP/torque curves for 103 with my mods as RH TD (84 vs 95 HP: 100 vs 107 torque). for grins we took off AC cover with solid scallop sides and compared (gained 4 HP). Thus had the holes drilled for improved air intake ( will get to find out next thursday when re dyno with RH TD and the new AC cover).

HWYMAN1 · « **Reply #34 on:** July 20, 2007, 05:41:51 PM »

Finally an end to AC cover 2: here is my "riding" AC cover ( notice SE backplate again, still decidng on re install of doherty PACC)

HWYMAN1 · « **Reply #35 on:** July 20, 2007, 05:42:18 PM »

up close

HWYMAN1 · « **Reply #36 on:** July 20, 2007, 05:43:09 PM »

now for the show AC cover ( cover by BadAss covers, and insert by sanjoy engraving)

HWYMAN1 · « **Reply #37 on:** July 20, 2007, 05:43:34 PM »

up close

Author Topic: Air cleaner cover 2 (Read 6330 times)

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2

HWYMAN1

Re: Air cleaner cover 2