www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: Dreaded Crank Run Out!!  (Read 13051 times)

0 Members and 2 Guests are viewing this topic.

gabe

  • because i can
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Dreaded Crank Run Out!!
« Reply #30 on: July 28, 2012, 06:43:41 AM »
 check out revolution performance they did the bottom end of my build/heads and bought  there 113 kit   they have it all and great to deal with
Logged
2009 ultra black
1962 impala 409/ 4 speed /posi rear/ 2 4 barrels

GreatGazoo

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 60
Re: Dreaded Crank Run Out!!
« Reply #31 on: August 01, 2012, 12:48:26 PM »
After reading this thread I am real nervous.....

Just replaced the cams on a Dyna 110 and mine has 6500 miles with .019 run out on it.  Should I have taken care of this when I had it apart?
Logged

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: Dreaded Crank Run Out!!
« Reply #32 on: August 01, 2012, 01:36:48 PM »
Quote from: GreatGazoo on August 01, 2012, 12:48:26 PM
After reading this thread I am real nervous.....

Just replaced the cams on a Dyna 110 and mine has 6500 miles with .019 run out on it.  Should I have taken care of this when I had it apart?

Yes!  If the bike is under warranty have them pay for it since the crank is out of spec.
Logged
2012 Black/Orange SEUC

GreatGazoo

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 60
Re: Dreaded Crank Run Out!!
« Reply #33 on: August 01, 2012, 01:42:59 PM »
Bike is not under warranty....anyone in Maryland know a good builder...the dealers here are less than desirable

Any idea of the cost to get it trued and welded? Just leave it until the thing breaks around 20-30K miles as everyone states the 110's are good for?
« Last Edit: August 01, 2012, 02:16:45 PM by GreatGazoo »
Logged

Z10

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 166

    • CVO1: 2006 FLHTCUSE Autumn Haze
Re: Dreaded Crank Run Out!!
« Reply #34 on: August 25, 2012, 03:10:10 PM »
Quote from: GreatGazoo on August 01, 2012, 01:42:59 PM
Bike is not under warranty....anyone in Maryland know a good builder...the dealers here are less than desirable

Any idea of the cost to get it trued and welded? Just leave it until the thing breaks around 20-30K miles as everyone states the 110's are good for?

Take it to Hillside Cycle.
Logged

cruzmisl

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Dreaded Crank Run Out!!
« Reply #35 on: August 26, 2012, 11:04:07 PM »
yikes, that's a lot of runout. I think to do a crank is about $1200 give or take a bit. That's you taking it all apart and putting it back together.
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3164
Re: Dreaded Crank Run Out!!
« Reply #36 on: August 26, 2012, 11:17:39 PM »
PM laylonlor for a good MD builder.
He used a builder at a dealer there, I don't recall his name but he was very experienced and detailed. the 110 ended up at 122/125 after JD tuned it.
Logged

prodrag1320

  • AMRA & AHDRA P/D record holder
  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 917
Re: Dreaded Crank Run Out!!
« Reply #37 on: August 27, 2012, 07:35:28 AM »
Quote from: GreatGazoo on August 01, 2012, 12:48:26 PM
After reading this thread I am real nervous.....

Just replaced the cams on a Dyna 110 and mine has 6500 miles with .019 run out on it.  Should I have taken care of this when I had it apart?
YIKES!! .019??ide be addressing that pronto (you do mean .019,not .0019,right??)
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3164
Re: Dreaded Crank Run Out!!
« Reply #38 on: August 27, 2012, 06:23:08 PM »
I do recall the techs name FWIW, Herb
Logged
Pages: 1 2 [3]  All
« previous next »
 

Page created in 0.257 seconds with 21 queries.