www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: Stock Pushrods & GMR Lifters  (Read 7620 times)

0 Members and 1 Guest are viewing this topic.

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Stock Pushrods & GMR Lifters
« on: April 21, 2015, 08:56:45 AM »
I went ahead and removed the rocker boxes to get a better look inside.  Nothing obvious going on in there of course.  I decided to remove the lifters and inspect them. There is a tiny bit of scoring on the rollers but it is very minimal.  I am going to replace them anyway, since I am already in there.  My question is, since I removed the rocker boxes, can I reuse the stock push rods with replacement GMR lifters or MUST I buy new adjustables?
thank you
Glen
Logged

r0de_runr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 553
  • Officer Scott Noller RIP, 01/04/1989 - 12/28/2017
    • TX


    • CVO1: 2020 CVO Limited
    • CVO2: SOLD 2012 CVO Street Glide
    • Wichitagreg
Re: Stock Pushrods & GMR Lifters
« Reply #1 on: April 21, 2015, 01:39:49 PM »
IMO reuse them.
Logged
Greg
formerly WichitaGreg
Lives in the TX Hill Country
AKA r0de_runr
Explore your VA Benefits:  http://1.usa.gov/1NPzKkM

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Stock Pushrods & GMR Lifters
« Reply #2 on: April 21, 2015, 01:42:58 PM »
Lifters are pretty much universal in basic dimensions, so it shouldn't be a problem to use the stock pushrods (but it still wouldn't hurt to pose your question to GMR).  Where you have to be careful is when changing camshafts, which do not necessarily use the same base circle diameters as stock.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Re: Stock Pushrods & GMR Lifters
« Reply #3 on: April 21, 2015, 03:03:22 PM »
Thats kinda what I figured.  And since the engine hasnt been rotated since I removed everything, I wont have to worry about adjustments, only waiting on all of the lifters to leak down and "equalize before starting the engine (I am guessing).  I would love to order them today, but I have called a couple of times and left a message.  I havent heard back from anyone.  I also sent an email.  I am ready to order now..LOL
Glen
Logged

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Re: Stock Pushrods & GMR Lifters
« Reply #4 on: April 22, 2015, 07:52:00 AM »
Called again this morning.. Hopefully I get a callback today.  Wanna get this thing back together!! 
Glen
Logged

sadunbar

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11416
  • EBCM # Stealth - SSBS # 1.1 - SoA # Z&E2525 .01%
    • IL


    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2000 FXR4
Re: Stock Pushrods & GMR Lifters
« Reply #5 on: April 22, 2015, 08:14:07 AM »
Quote from: adkg12 on April 22, 2015, 07:52:00 AM
Called again this morning.. Hopefully I get a callback today.  Wanna get this thing back together!! 
Glen

Give Steve another call...  He's about as reliable as they come.   :2vrolijk_21:
Logged
2007 Screamin Eagle Ultra Classic - Light Candy Cherry and Black Ice
Screamin Eagle 120r
Revolution Performance EMS
Fuel Moto Jackpot headpipes and 4.5" Pro Touring Mufflers
HPI 55mm Throttle Body w/5.3 injectors
BDL clutch w/VPC92T
Traxxion AK-20
Legend Air Suspension
Brembo Brake Calipers/Rotors
Garmin Zumo
575 Chubby's
Bushtec Quantum

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: Stock Pushrods & GMR Lifters
« Reply #6 on: April 22, 2015, 09:18:37 AM »
Steve is a busy man (a good thing) but has always returned my calls. Usually talks me ear off :)
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Re: Stock Pushrods & GMR Lifters
« Reply #7 on: April 22, 2015, 09:22:14 AM »
Well hopefully it'll be today..I'm sure he's just busy.  I left another message today...wonder how long it takes to get the parts once they are ordered..Lol
Glen
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Stock Pushrods & GMR Lifters
« Reply #8 on: April 22, 2015, 01:06:36 PM »
Sorry out of town for a few days just got back in and yes I am doing my best to return the 82 + messages from Monday and Tuesday.  :D 
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

MightyTharg

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
  • www.CVOHARLEY.com


    • CVO1: 2015 CVO Street Glide
Re: Stock Pushrods & GMR Lifters
« Reply #9 on: April 23, 2015, 03:38:59 AM »
Quote from: GMR-PERFORMANCE on April 22, 2015, 01:06:36 PM
Sorry out of town for a few days just got back in and yes I am doing my best to return the 82 + messages from Monday and Tuesday.  :D

Are you trying to suggest you have a life AND a business?

Logged

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: Stock Pushrods & GMR Lifters
« Reply #10 on: April 23, 2015, 06:29:08 AM »
Quote from: GMR-PERFORMANCE on April 22, 2015, 01:06:36 PM
Sorry out of town for a few days just got back in and yes I am doing my best to return the 82 + messages from Monday and Tuesday.  :D

Visiting brothels and partying all night hardly qualifies as busy!  :P
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Re: Stock Pushrods & GMR Lifters
« Reply #11 on: April 29, 2015, 01:41:59 PM »
UPDATE:  All of the work is done and all seems to be well.  What I have noticed is that the annoying "tick" at idle is nearly completely gone.  Good news right?  Well, yea, BUT now it "ticks" while I am just cruising and/or accelerating!!  Also, that chattering I was getting at 2200RPM, is totally gone...at 2200RPM, now its at 3000RPM..LOL Ideas?   But overall, the bike sounds much better and although that tick is still there, I feel much more confident in the engine than  before.  I wonder if the tick is because I used the stock pushrods and maybe some preload would help....I am open to ideas...
Thanks for all the help ahead of time guys.   Thanks Steve at GMR Performance!!
Ideas?
Glen
Logged

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: Stock Pushrods & GMR Lifters
« Reply #12 on: April 29, 2015, 06:26:49 PM »
I've had 3 sets of lifters and 2 different cams in my bike and they have all made top end noise. Nature of the beast.

Jesse
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

adkg12

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220
    • OH


    • CVO1: 2007 FLHRSE3 - CVO Screaming Eagle Road King.
Re: Stock Pushrods & GMR Lifters
« Reply #13 on: May 05, 2015, 08:45:31 AM »
Quote from: Jswerve on April 29, 2015, 06:26:49 PM
I've had 3 sets of lifters and 2 different cams in my bike and they have all made top end noise. Nature of the beast.

Jesse

Yep I think you are hitting the nail on the head.  The sounds that I am getting now so more "normal" than the ones I was getting before.  I made the mistake though of changing back to Syn3.  I wont be doing that again.  The normal sounds got much louder and more pronounced.  Although I know they say it isnt a good idea to swap oil around, I believe I will try something different next time.  $13.00 a quart..Really?  Fool me once..
Glen
Logged

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: Stock Pushrods & GMR Lifters
« Reply #14 on: May 05, 2015, 09:51:24 AM »
Quote from: adkg12 on May 05, 2015, 08:45:31 AM
Yep I think you are hitting the nail on the head.  The sounds that I am getting now so more "normal" than the ones I was getting before.  I made the mistake though of changing back to Syn3.  I wont be doing that again.  The normal sounds got much louder and more pronounced.  Although I know they say it isnt a good idea to swap oil around, I believe I will try something different next time.  $13.00 a quart..Really?  Fool me once..
Glen
Glen I'm running liqi-moly 10w-60. Popular over on HTT forum. Got 10 litres off eBay for $80. That's less than $8 a qt.

Jesse
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High
Pages: [1] 2  All
« previous next »
 

Page created in 0.204 seconds with 21 queries.