www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King  (Read 1235 times)

0 Members and 1 Guest are viewing this topic.

Ronald R.

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • WI

Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« on: January 31, 2016, 07:57:50 PM »
I'm starting to notice a little oil blowing out of the intake. Does anyone have an idea what might be happening? The bike has 20K miles on it.  Thanks
Logged

FLTR2008TRIKE

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 83
Re: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« Reply #1 on: January 31, 2016, 09:02:18 PM »
Engine oil level could be the issue. If it's overfilled.
Logged
S&S 124" Head porting and custom designed cams by John @ http://www.jwperf.com/. 10.5 static / 9.41 corrected. Modified V&H Powerdual headpipe with CVO 4" cans and Fullsac 2.25 baffles

Ronald R.

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • WI

Re: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« Reply #2 on: January 31, 2016, 09:12:20 PM »
I've thought of that also and tried to keep the level a little less than the manual calls for. I'm hoping your right. Other than that she runs like sewing machine breathing fire.
 Thanks
Logged

mark

  • Guest
Re: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« Reply #3 on: January 31, 2016, 09:48:35 PM »
HDs are notorious for doing what you described.  Try running the oil level less than full (between 1/4 to 1/2 qt low).  My bike seems to do this during mountain riding, with lots of up/down shifting and engine braking.
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« Reply #4 on: February 01, 2016, 02:24:29 AM »
Wondering if you like to twist the wick a bit ?    :nixweiss: :nixweiss:
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

prodrag1320

  • AMRA & AHDRA P/D record holder
  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 917
Re: Oil blowing out of intake on 2008 110 cu, in. Anniv. Road King
« Reply #5 on: February 01, 2016, 07:47:12 AM »
the oil is coming out of your breathers,witch go from the head to the A/C for EPA regulations,the oil isn't coming out of the intake.like said all ready the problem is most likely cause by oil tank being overfilled,but also can be caused by sumping (lower end actually filling with oil from poor scavenging),worn umbrella valves in the breathers themselves or bad ring seal
Logged
 

Page created in 0.236 seconds with 25 queries.