Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Puzzled]

Howie, do some homework. The swingarm is different for the 07's.

Does the swing arm mount the same as prior years? Rubber bushing with a pivot bolt through it coupled with a pivot block bolted to the frame.

[Hoist!]

Does the swing arm mount the same as prior years? Rubber bushing with a pivot bolt through it coupled with a pivot block bolted to the frame.

No, that's what I was referring to in my description. The parts bokk shows a bunch of spacers and bearings. It doesn't look like the usual set up with the rubber bushings. Can you talk to these folks about the '07 SERK? Hoist!

[Puzzled]

I'll definitely check later when they start answering the phone.

I may venture over to the HD dealer today to look at a new bike and a parts catalog.

[Hoist!]

I'll definitely check later when they start answering the phone.

I may venture over to the HD dealer today to look at a new bike and a parts catalog.

Thanks a lot. Maybe the design changes result in a stiffer setup and won't require these additional bushings, or wouldn't be applicable at. Finding more and more changes on these '07's every day. Hoist!

[Puzzled]

There were changes to the 07 swingarm but not to the way it mounts on the motorcycle. Same design since early 80's. So the Sta-Bo II's fit the 07's.

[RJ749]

There were changes to the 07 swingarm but not to the way it mounts on the motorcycle. Same design since early 80's. So the Sta-Bo II's fit the 07's.

Go Howie, go Howie, it's your birthday...............

[Hoist!]

Go Howie, go Howie, it's your birthday...............

We're almost there Rog. We need to confirm that it's the same for the '07 SERK specifically, with the wider swingarm. Then it gets ordered! Hoist!

[RJ749]

We're almost there Rog. We need to confirm that it's the same for the '07 SERK specifically, with the wider swingarm. Then it gets ordered! Hoist!

Got to the HD shop today to find out a mis-communication of OCD proportion.  Check the attached pic, I guess if you're going to go you may as well go all the way...............True Track Tracula bushings et al.

No stinking plastic bushings for me

[mr_magoo]

Look nice are those needle bearing?  Metal sounds better than plastic where did you get them from?  Part #

[RJ749]

Look nice are those needle bearing?  Metal sounds better than plastic where did you get them from?  Part #

I was fine with the Sta Bo set up this was a bit of a cluster, but it looks like it will work out.  I posted  link over here: http://www.cvoharley.com/smf/index.php?topic=12999.msg202172#msg202172

Not looking to hi jack Puzzled's thread

[mr_magoo]

Thanks for the info.  Will wait for reviews.

[Twolanerider]

Got to the HD shop today to find out a mis-communication of OCD proportion.  Check the attached pic, I guess if you're going to go you may as well go all the way...............True Track Tracula bushings et al.

No stinking plastic bushings for me

Man, that ain't no 10 minute install.  But they weren't scored for 40 bucks either!  Holy shmokes they look sharp though.

[RJ749]

Man, that ain't no 10 minute install.  But they weren't scored for 40 bucks either!  Holy shmokes they look sharp though.

Oh well, best laid plans Don, should be slick though.  Can't wait to get it on the road.

[Twolanerider]

Oh well, best laid plans Don, should be slick though.  Can't wait to get it on the road.

If another person or two suggests an idea or three that bike won't be out of the shop until after Nelson....

[Fired00d]

If another person or two suggests an idea or three that bike won't be out of the shop until after Nelson....

But it's so much fun.

 
Ride Safe,
Fired00d