www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2] 3  All

Author Topic: 110 lifter failure, recommendations on RELIABLE build  (Read 10350 times)

0 Members and 1 Guest are viewing this topic.

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #15 on: August 26, 2020, 01:04:29 PM »
No sorry they do not. That said I am not aware of any roller  failures. These have been offered since 2001 by other vendors
Logged

CVO Couple

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
  • www.CVOHARLEY.com
    • SC


    • CVO1: 2015 FLHTKSE
    • CVO2: 2008 FXSTC Anniversary
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #16 on: August 27, 2020, 07:19:19 AM »
Quote from: HD Street Performance on August 26, 2020, 01:04:29 PM
No sorry they do not. That said I am not aware of any roller  failures. These have been offered since 2001 by other vendors
Is it the roller that fails on the stock 110 lifter or the roller bearing?


Sent from my iPhone using Tapatalk
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #17 on: August 27, 2020, 09:53:58 AM »
It can be either or both. The heat treat of the roller along with the harmonics in the valve train in the 2000-2700 rpm range are close to the root causes in my opinion. 
Logged

KGB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1250
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2016 FLHXSE Carbon Crystal with Phantom Flames
    • CVO2: 2019 FLHTKSE Magnetic Grey/Wineberry w Red Pepper
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #18 on: August 27, 2020, 11:32:16 AM »




Sent from my iPhone using Tapatalk
Logged
2018 MITM Eureka Springs
2018 WV GTG
2018 Maggie Valley GTG
2019 MITM Eureka Springs
2019 Maggie Valley GTG
2020 Maggie Valley GTG
2021 WV GTG
2021 Maggie Valley GTG
2022 Ohio GTG
2023 Maggie Valley GTG

CVO Couple

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
  • www.CVOHARLEY.com
    • SC


    • CVO1: 2015 FLHTKSE
    • CVO2: 2008 FXSTC Anniversary
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #19 on: August 31, 2020, 06:21:21 PM »
Has anyone seen a vendor with Hylift Johnson B2313SE lifters in stock?


Sent from my iPhone using Tapatalk
Logged

Texas 103

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1483
  • FLHRSEI.ORG
    • TX

    • CVO1: 2016 "RGU"
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #20 on: September 01, 2020, 01:48:10 PM »
Quote from: CVO Couple on August 31, 2020, 06:21:21 PM
Has anyone seen a vendor with Hylift Johnson B2313SE lifters in stock?


Sent from my iPhone using Tapatalk

WFO Larry
Logged
Too Much of a good thing is just right !! Then more is always better

CVO Couple

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
  • www.CVOHARLEY.com
    • SC


    • CVO1: 2015 FLHTKSE
    • CVO2: 2008 FXSTC Anniversary
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #21 on: September 02, 2020, 04:35:54 PM »
Quote from: Texas 103 on September 01, 2020, 01:48:10 PM
WFO Larry
Thanks


Sent from my iPhone using Tapatalk
Logged

Jbbrown73

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 882
    • IL


    • CVO1: 2015 CVO RG Ultra
    • CVO2: 2002 FLHRSEI (Brandywine)
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #22 on: October 23, 2020, 08:46:47 AM »
Great news......... the lifter did not come apart, just made one hell of a noise. So no metal in engine, no need for new cams, and I only have to spend money on upgrades not damage. Looking forward to the magic that Jason at C&S does with the engine.
Logged
Carterville, (Southern) Illinois (that would be 350 miles south of Chicago)

Homer 661

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • www.CVOHARLEY.com
    • CA

Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #23 on: October 23, 2020, 06:26:37 PM »
Quote from: CVO Couple on August 31, 2020, 06:21:21 PM
Has anyone seen a vendor with Hylift Johnson B2313SE lifters in stock?


Sent from my iPhone using Tapatalk

I got mine here ...... https://www.automotivemachine.com/
Logged

Jbbrown73

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 882
    • IL


    • CVO1: 2015 CVO RG Ultra
    • CVO2: 2002 FLHRSEI (Brandywine)
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #24 on: January 20, 2021, 09:00:30 AM »
The blue beast lives again!!! I want to thank Jason Clasquin at C&S Speed in metro east St. Louis for doing such a great job on the Road Glide. I asked him to build me a reliable engine that will take me around the country in style. It's supposed to be decent this week, low 50's one day so I hope to get out and take a little test ride.
Logged
Carterville, (Southern) Illinois (that would be 350 miles south of Chicago)

SHRADER

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2071
    • WV


    • CVO1: 2004 FLHTCSE Betsy
    • CVO2: 2014 FLHRSE6 Orange Crush
    • CVO3: 1947 Indian Chief Nanner Puddin HBRR Fastest Side Valve
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #25 on: January 20, 2021, 10:54:32 AM »
Ok Pal
You know the rules....Its downright uncivilized to post a dyno chart without detailing the specs of the build.

Whatinall did ya do to it?
Logged
2014 SERK Orange Crush-Fullsac cores and screens, Decatted Headpipe, TTS Mastertune, Kury 24D, Custom Dynamic Signals, Memphis Fairing, HBRR 117R 123HP/137TQ
2004 SEEG  Huckleberry- 113 HP/115 TQ

Charter Member and National Vice President Hillbilly Rocket Riders
Charter Member and National President CVO Harley Critter Gawking Society
National President and Founder of WRENCH We Ride Everywhere Nomatter Cold or Hot
Zen Master of Pondering

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50579
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #26 on: January 20, 2021, 11:02:09 AM »
Quote from: SHRADER on January 20, 2021, 10:54:32 AM
Ok Pal
You know the rules....Its downright uncivilized to post a dyno chart without detailing the specs of the build.

Whatinall did ya do to it?

It got some new up and down thingies and a go around part.
Logged

SHRADER

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2071
    • WV


    • CVO1: 2004 FLHTCSE Betsy
    • CVO2: 2014 FLHRSE6 Orange Crush
    • CVO3: 1947 Indian Chief Nanner Puddin HBRR Fastest Side Valve
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #27 on: January 20, 2021, 11:07:41 AM »
Quote from: Twolanerider on January 20, 2021, 11:02:09 AM
It got some new up and down thingies and a go around part.

Very insightful, glad you cleared that up Don

PS
I thought them Up and Down Thingies were actually thingamabobs?
Logged
2014 SERK Orange Crush-Fullsac cores and screens, Decatted Headpipe, TTS Mastertune, Kury 24D, Custom Dynamic Signals, Memphis Fairing, HBRR 117R 123HP/137TQ
2004 SEEG  Huckleberry- 113 HP/115 TQ

Charter Member and National Vice President Hillbilly Rocket Riders
Charter Member and National President CVO Harley Critter Gawking Society
National President and Founder of WRENCH We Ride Everywhere Nomatter Cold or Hot
Zen Master of Pondering

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50579
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #28 on: January 20, 2021, 11:11:13 AM »
Quote from: SHRADER on January 20, 2021, 11:07:41 AM
Very insightful, glad you cleared that up Don

PS
I thought them Up and Down Thingies were actually thingamabobs?

If the up and down thingies and thingamabobs would high dome up and down things be thingamaboobs?
Logged

SHRADER

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2071
    • WV


    • CVO1: 2004 FLHTCSE Betsy
    • CVO2: 2014 FLHRSE6 Orange Crush
    • CVO3: 1947 Indian Chief Nanner Puddin HBRR Fastest Side Valve
Re: 110 lifter failure, recommendations on RELIABLE build
« Reply #29 on: January 20, 2021, 11:13:42 AM »
I thought thingamaboobs were on a 92 year old stripper?

Or is that thingamamawboobs?
Logged
2014 SERK Orange Crush-Fullsac cores and screens, Decatted Headpipe, TTS Mastertune, Kury 24D, Custom Dynamic Signals, Memphis Fairing, HBRR 117R 123HP/137TQ
2004 SEEG  Huckleberry- 113 HP/115 TQ

Charter Member and National Vice President Hillbilly Rocket Riders
Charter Member and National President CVO Harley Critter Gawking Society
National President and Founder of WRENCH We Ride Everywhere Nomatter Cold or Hot
Zen Master of Pondering
Pages: 1 [2] 3  All
« previous next »
 

Page created in 0.223 seconds with 21 queries.