Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bixby CVO]

Just bought the 2023 CVO road glide and got pro street tuner and vance and hines big radius as part of the deal. I now want to add the extreme air cleaner. Will I need to retune the bike and if so, will I have to start over on the tuning process.
Thank you for any help.

[FLSTFI Dave]

Just bought the 2023 CVO road glide and got pro street tuner and vance and hines big radius as part of the deal. I now want to add the extreme air cleaner. Will I need to retune the bike and if so, will I have to start over on the tuning process.
Thank you for any help.

That sounds like the Harley tuner.  It only has a couple of maps.  Your not so much as tuning it, but more like down loading a map to fit the things you have added.  High flow air cleaner and high flow exhaust.  It can't handle any other changes.

I have the Tab Bam stick mufflers and the Extreme heavy breather on my 23.5 CVO Road Glide.  I do not have a tuner.

[Tractor Bubba]

A bit of update:
 1) I really like the Klock Werks (13.5”) windscreen. It works very well
     There a bit of vibration/shake around 35-40 mph, but nothing bothersome.

 2) I’ve added the Mustang 2-piece seat (orange stitching) with rider backrest
      Seems to set a bit further from the tank, and the backrest is SO much better.

 3) Started getting both a “check engine code” as well as the “warning light”
      (triangle with an “!” In it), so took it to the dealer…. 18 days ago!
      They can’t seem to sort-out the problem(s). Have tried to re-map the system(s),
       without success, I’m told. Tomorrow (after over two weeks,) the dealer technicians
       are going to “perform a remote in diagnostic with factory Harley mechanics”.
       While I’m pleased they’re FINALLY going to take this step - I’m VERY frustrated that
       it’s taken OVER TWO WEEKS for Milwaukee to get this involved!

      If my less than 3-months old, $50k motorcycle, isn’t responding to diagnostic procedures,
      I’d think they’d be replacing ECU, BCU, battery - SOMETHING…ANYTHING!

      And, I’d think the Motor Company could do more than “remote diagnostics” - like maybe
      get a “real, live HD Service Rep” on-site - so they can learn what’s causing these issues!

      It’s going-on THREE WEEKS (of absolutely beautiful Colorado Autumn riding weather)
      and there’s been ZERO PROGRESS and ZERO PROSPECTS!

[OBB]

A bit of update:
 1) I really like the Klock Werks (13.5”) windscreen. It works very well
     There a bit of vibration/shake around 35-40 mph, but nothing bothersome.

 2) I’ve added the Mustang 2-piece seat (orange stitching) with rider backrest
      Seems to set a bit further from the tank, and the backrest is SO much better.

 3) Started getting both a “check engine code” as well as the “warning light”
      (triangle with an “!” In it), so took it to the dealer…. 18 days ago!
      They can’t seem to sort-out the problem(s). Have tried to re-map the system(s),
       without success, I’m told. Tomorrow (after over two weeks,) the dealer technicians
       are going to “perform a remote in diagnostic with factory Harley mechanics”.
       While I’m pleased they’re FINALLY going to take this step - I’m VERY frustrated that
       it’s taken OVER TWO WEEKS for Milwaukee to get this involved!

      If my less than 3-months old, $50k motorcycle, isn’t responding to diagnostic procedures,
      I’d think they’d be replacing ECU, BCU, battery - SOMETHING…ANYTHING!

      And, I’d think the Motor Company could do more than “remote diagnostics” - like maybe
      get a “real, live HD Service Rep” on-site - so they can learn what’s causing these issues!

      It’s going-on THREE WEEKS (of absolutely beautiful Colorado Autumn riding weather)
      and there’s been ZERO PROGRESS and ZERO PROSPECTS!

Got a pix of that seat setup or link to the one you bought by chance? I'm in dire need of a backrest. I put the stock seat back on with the HD backrest that goes through the one piece seat and it's a full inch and a half forward from the back of the rider's seat position which pushes me and my legs too far forward. I bought the HD 2 piece seat when I bought the bike ('24 RG) but nobody has an aftermarket backrest for it. I tried to use the BadBoyz Cycle one I had on my '12 and it doesn't work with the new seat.

[FLSTFI Dave]

Got a pix of that seat setup or link to the one you bought by chance? I'm in dire need of a backrest. I put the stock seat back on with the HD backrest that goes through the one piece seat and it's a full inch and a half forward from the back of the rider's seat position which pushes me and my legs too far forward. I bought the HD 2 piece seat when I bought the bike ('24 RG) but nobody has an aftermarket backrest for it. I tried to use the BadBoyz Cycle one I had on my '12 and it doesn't work with the new seat.

Is that two piece seat the same as whats on the 23.5 and 24 CVO?  If so George at BadBoyz Cyclez makes one for it.  Last I looked it still wasn't on his web site.  I was going to have him improve my seat this summer but he was having health issues and turn around times were over a month.

[OBB]

Is that two piece seat the same as whats on the 23.5 and 24 CVO?  If so George at BadBoyz Cyclez makes one for it.  Last I looked it still wasn't on his web site.  I was going to have him improve my seat this summer but he was having health issues and turn around times were over a month.

Nope. His seats are hideous. The back seat overlaps the front and the rider's backrest goes through the front end of the back seat. When running solo seat, that backrest sticks up about 3 inches.

The one I bought is the HD 2 piece seat similar to the CVO setup.

Sent from my SM-N981U using Tapatalk

[Tractor Bubba]

I don’t have a photo of the Mustang 2-piece with rider backrest on my scooter right now.
But, the dealer Service Manager called this afternoon, and it sounds as-if they, with the
assistance of Milwaukee’s techs, got my CVO Road Glide “fixed” late today. I should be
able to pick it up tomorrow - and I’ll get a couple photos of the seat on Thursday 🤪.

I’ll try to attach a coupe of pics from the Mustang Seats website (not sure if I know how!)
Mine has “mandarine orange” stitching.

[Tractor Bubba]

Another from the Mustang website…

[OBB]

I don’t have a photo of the Mustang 2-piece with rider backrest on my scooter right now.
But, the dealer Service Manager called this afternoon, and it sounds as-if they, with the
assistance of Milwaukee’s techs, got my CVO Road Glide “fixed” late today. I should be
able to pick it up tomorrow - and I’ll get a couple photos of the seat on Thursday 🤪.

I’ll try to attach a coupe of pics from the Mustang Seats website (not sure if I know how!)
Mine has “mandarine orange” stitching.

That works. Appreciate it.

[Cvostu]

Had bad Boyz modify my stock seat and add a back rest. Works great for me.

[Tractor Bubba]

OBB
I tried to upload a photo of the Mustang 2-piece seat with rider backrest.
But, I got an error message that the file is too large…
…I’m going to have to research how to reduce the file size on my iPad.
Sorry, Bubba

[OBB]

OBB
I tried to upload a photo of the Mustang 2-piece seat with rider backrest.
But, I got an error message that the file is too large…
…I’m going to have to research how to reduce the file size on my iPad.
Sorry, Bubba

Appreciate it.

[FLSTFI Dave]

Had bad Boyz modify my stock seat and add a back rest. Works great for me.

That looks really good Stu.  Is the modification to the seat an improvement in rider comfort?

[Tractor Bubba]

OBB

Here’s some photos of the Mustang 2-piece seat with rider backrest installed on my
CVO Road Glide (Whiskey Neat) per the earlier messages.

Bubba

[Tractor Bubba]

Another one…