Just put my hitch on last week - not sure mine has much, if any adjustment.....I will have to look at it again. In any case, it wouldn't have enough adjustment to make room for the light in the chrome version of the fender light.
Thanks!
There's not a lot of adjustment. But enough. At least for the standard painted version of the Street Glide light.
Only problem might be if it's an older Bushtec hitch. They altered their hitches shortly after the Street Glides came out to account for the fender extension. After the product change that became, however, the only model of hitch for the touring bikes. So as long as it's recent stock you've got the best option they'll offer.
When I first installed mine it touched the fender extension. Barely. Was just sure I had all the holes used to get as far rearward as it would go. Swore a little. Had another beverage (or three). Loosened it all back off again and pushed and tweaked and removed and loosened and swore and tweaked and tapped. Then, I'll be damned, it all went back together with room to spare. Gained 1/4" between the fender extension and the hitch.
It's very solid when it's all together too. So if it clears it's good enough. You can pick the ass end of the bike off the ground with the hitch and the hitch won't get closer to the fender extension.