Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hd2003-se2005]

Mr. MFG

To the rescue again!
That's a great site!
I like to play with the #s
Have saved that site for future reference.

Thanks

Here's a simple one
To determine cubic inches do the following math;

Bore X Bore X Stroke X # of cylinders X .7854 = cubic inches
For CC's take inches X 16.39 = CC's

[110tHunDer]

KNG103 those are pretty good numbers for your motor however, it doesn't show that those dyno runs are SAE corrected.

[kng103]

if you multiply the #'s on the site, the sae #'s would actually be much higher.
as far as having 100#'s of torque as delivered, why not?
all he did was change the map for the new mods.

[Tonys]

Here's one more for comparison..05 SEEG, pro pipe, stage 1, race tuner. It feels a lot quicker than before. I'm happy...for now. [smiley=beerchug.gif]

[JCZ]

I told you that you were going to like that Tony.  Now we got the same HP and the same tuner, how did you end up with 3 ft lb of torque more than me?  Is he learnin something new on tuning?  I think we have the exact same mods.

[Twolanerider]

I told you that you were going to like that Tony.

[Tonys]

It's simple JC.

[Tonys]

I told you that you were going to like that Tony.

[hd2003-se2005]

Red ones are always faster! [smiley=xyxthumbs.gif]

[HUBBARD]

Hey hd2003,
 I beg to differ.  Air moves over Black faster than any other color.  I'm sure some of our members will research and find this to be fact.  You see, I need every advantage I can find to push my overweight Dresser through the air!  Later--HUBBARD      

[Twolanerider]

Hey hd2003,
 

[mongo56]

Thanks JC,  But you got to keep up on this stuff.  Kidding a side what did you think of the dyno sheet they do a good job the only dip is low enough thet you don't notice it.

What are Freedom Pipes...that's a new one on me.  WHo makes them?

[mfgreen]

What are Freedom Pipes...that's a new one on me.

[hd-dude]

What are Freedom Pipes...that's a new one on me.

[PCC]

Brad Yuill at Freedom also does some of the best headwork in the industry.  Reno, NV 775-848-8600 Brad's direct line.