TODAYS UPDATE:
Got the TBag Dekker Supreme today. That thing is really cool. Doesn't appear too big in my kitchen. Bike's at the shop, so I can't check it out yet. It's about the length of normal piece of airline carry on luggage, but narrower. If it works as good as it looks, it's the bag to get! I'll let ya know after the trip.

Cybil's getting worked on. The amp was mounted last night and being wired. Same with the TP interior light, and saddlebag spoiler light. I cheated on the HW amp wiring a little. I was having a hard time coming up with a good method for a quick disconnect for the no.10 power and ground wires HW furnished. So I decided that no.12 wires would do instead. I used 2 universal Battery Tender harnesses ($6 apiece), retained the fuse holder on one of them for the 25A fuse, and cut off the other one. Now I have a simple connector for the power wires. There's also a quick disconnect "Remote" wire going back to the Aux Sw to turn it on (along with the front amp and Zumo), and the "Audio" RCA connector (Quick disconnect via an RCA connection under the seat) to get the audio signal from the Zumo to the amp. Lotta damn quick disconnects under the seat now! 3 for the amp, the seat, the interior light, the TP and saddlebag lid spoilers! But no damn fairing!!!

The FBI floorboard highway pegs are to be removed. Don't care for em.

And hopefully Vern will get to, and come up with something, TO STOP THE DAMN PUKING ON THE BIKE AND BINX! To get it to the ground anyway. It isn't worth trying to stop it anymore, just redirect it. Not an easy task with that HPI backplate. I hope he finds the time to figure something out!

I'll be picking her up tomorrow night, loading up, and heading to KY with my 2 girls on Fri. morning!!!

Hoist!
