I made mention of this fix over in the Victory Motorcycles thread that had gotten off topic, but thought that since quite a few folks had a problem with this, and at least one asked for a photo, I would start a new topic here with a few photos. This little device catches the oil and water mixture from the head breathers and channels it into a little chrome catch can. I get about 2 to three tablespoons of gray gunk (smelly oil and water mixture) out of it every 1,000 miles or so...gunk that would otherwise be sucked back into the combustion chamber, unless you route it to the ground, which for me was not an acceptable solution.
I chose to use a clear hose so that I can see what is being routed to the can. It is a very well made little device, comes in chrome or polished, and can be purchased here.
http://www.motorcycles-stuff.com/pages/OilMistColl.shtml They have a lot of other information about them on their website.
I've seen similar devices from Kuryakyn, and I've seem them on Ebay from what looks to be a K & N stamp on them for more money.
The first photo is an overall from 3 to 4 feet away. A couple of others follow from different angles.