www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 ... 6  All

Author Topic: 09 SERG Comp Springs Shot.  (Read 9539 times)

0 Members and 2 Guests are viewing this topic.

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
09 SERG Comp Springs Shot.
« on: February 27, 2009, 10:21:10 AM »
Getting the bike back from the dealers today, Had a rattle noise in the primary and the starter would hang up on occassion. The dealer replaced the Compensator and installed new starter pinion gear and clutch basket they were dinged up. JFYI  Doc
Logged

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12666
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: 09 SERG Comp Springs Shot.
« Reply #1 on: February 27, 2009, 10:23:24 AM »
did dealer say if this was an isolated incident or if they have heard of others?
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #2 on: February 27, 2009, 11:20:38 AM »
Dealer did say he has seen the comp spring load loose fit before and has had to add springs to it to tighten up the clamp load, to stop the rattle, the comp bolt was tight. The starter hang up could have been caused be a bad clutch basket which has been replaced also.  Doc
Logged

Gone Fishin'

  • The Director
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1984

    • CVO1: 2016 FLHTKSE Limited®, Black Sparkle and 2010 FLHTCUSE5 Ultra Classic®, Crimson Mist Black/Dark Slate, # 110 of 992
    • CVO2: 2007 FLHRSE3 Screamin' Eagle® Road King®, Black Ice, 1 of 1325
    • CVO3: 2001 FXDWG2, Scarlet Red and 2000 FXR4, Candy Tangerine, 1 of 316
Re: 09 SERG Comp Springs Shot.
« Reply #3 on: February 27, 2009, 12:59:43 PM »
Quote from: naitram on February 27, 2009, 10:23:24 AM
did dealer say if this was an isolated incident or if they have heard of others?
Which Harley dealer would actually confirm that they know something may go wrong?
 :nixweiss: :nixweiss: :nixweiss: :nixweiss:

Ride safely,
Louis
Logged
1914 10E, Grey
1956 FLH Custom, Candy Orange
1988 FXRS Custom, "S.O.A."
2000 FLSTF Custom Fat Boy, "Jumpin' Jack Flash"
2000 FXSTS Custom Springer Softail, Grey
2000 FXR4, Candy Tangerine
2001 FXDWG2, Scarlet Red
2005 FLHTCSE2, -9/07
2007 FLHRSE3, Black Ice
2008 FLHTCUSE3, -7/08
2009 FLHTCUSE4, -4/10
2010 FLHTCUSE5-BLK, Crimson Mist Black/Dark Slate
2012 VRSCDX ANV, Brilliant Silver Pearl
2016 FLHTKSE, Black Sparkle
2016 XL1200CX Roadster, Vivid Black
2018 FLFBS ANV
CVO 1480 IBA 26678

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #4 on: February 28, 2009, 07:25:57 AM »
They ended up replacing everything in the primary. It was all out of wack even the auto adjuster. always thought the clutch was a hard pull for a hydro clutch, like butter now, shifts better and is quiet.  Doc
Logged

ice6900

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3268

    • CVO1: fxstsse 07
    • CVO2: (non cvo) fxdl customised
    • CVO3: (custom)arlen ness 1914 flat trak replica
Re: 09 SERG Comp Springs Shot.
« Reply #5 on: February 28, 2009, 07:30:34 AM »
it can all be fixed! thats good news that its better than b4!
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #6 on: February 28, 2009, 08:45:14 AM »
I think now, that it is what it was surpose to be in the first place.  Doc
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #7 on: March 03, 2009, 09:41:32 AM »
Has to back again, after just 200 miles its rattling again this time louder like a rap.  Doc
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #8 on: March 04, 2009, 12:38:30 PM »
Anyone else have a loud primary,? I think it may have to due with the spring pak. MOCO should have included the SE spring pak. Doc
Logged

Gettinold

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5815
  • SOMEWHERE NORTH OF HEAVEN WHERE EAGLES DONT FLY
Re: 09 SERG Comp Springs Shot.
« Reply #9 on: March 04, 2009, 07:09:30 PM »
Doc yours must of been assembled on Friday or Monday.  :confused5: Sorry to here of your problem and good luck with the fix.
                         

                               Dave







   
Logged
09 FLTRSE3   ORG & BLK
06 VRSCSE2    ORG & BLK
04 FLHTCSE   ORG & BLK    SOLD
94 FXSTS      CUSTOM

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #10 on: March 05, 2009, 09:19:50 AM »
Asking for a meeting with the area rep, let him figure it out.  Doc
Logged

geezerglide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1869
  • New Geezerglide
    • AB

Re: 09 SERG Comp Springs Shot.
« Reply #11 on: March 05, 2009, 05:29:17 PM »
Quote from: HDDOCFL on February 27, 2009, 10:21:10 AM
Getting the bike back from the dealers today, Had a rattle noise in the primary and the starter would hang up on occassion. The dealer replaced the Compensator and installed new starter pinion gear and clutch basket they were dinged up. JFYI  Doc

The Compensator Nut (Torque) has been an on going problem for awhile. Check my replies to Porthole's Post Alternator Rotor & Sapcer Damage.

geezerglide
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #12 on: March 09, 2009, 08:03:58 AM »
Not that, clamp is tight, may try the new SE compensator assembly.
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: 09 SERG Comp Springs Shot.
« Reply #13 on: March 09, 2009, 08:53:50 AM »
Quote from: geezerglide on March 05, 2009, 05:29:17 PM
The Compensator Nut (Torque) has been an on going problem for awhile. Check my replies to Porthole's Post Alternator Rotor & Sapcer Damage.

geezerglide

The '07 and later bikes use a different design geezer, so the bulletin for the older bikes doesn't apply.  When Harley changed the primary for the '07 they went to a bolt for the compensator sprocket versus the long nut on the older bikes, and they made the spring pack part of the rotor versus the separate part on the older version.  Early bikes had reports of low spring tension which allowed the compensator to "bottom" and produce a clunk.  One fix was to add an additional spring to the pack.  The other was a touch of marketing genius often used by H-D to "fix" their screw-ups, they came out with a Screamin' Eagle heavy duty version that the customer could purchase.  I'm not sure about anyone else, but I tend to get hostile when a manufacturer expects me to pay top dollar for their product and then pay more to fix their quality and design issues.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: 09 SERG Comp Springs Shot.
« Reply #14 on: March 12, 2009, 07:46:51 AM »
Back in the dealers for the third time, started the noise again after 500 miles after repairs, Have asked for the area rep to check it out.   Doc
Logged
Pages: [1] 2 3 ... 6  All
« previous next »
 

Page created in 0.107 seconds with 21 queries.