Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: fullsac rear headpipe  (Read 963 times)

0 Members and 1 Guest are viewing this topic.

jiml

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 83
fullsac rear headpipe
« on: July 22, 2009, 12:24:11 PM »

any of you guys that have done this swap or r and r your rear pipe got any pointers, just ordered my modified pipe and was wondering if you found any tricks or snags
Thanks
Logged

GregKhougaz

  • It's a Two Wheeled World.
  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 9555
    • CA


    • CVO1: '22 BMW Grand America
    • CVO2: '18 Porsche C4 GTS
    • CVO3: '22 Porsche Macan GTS and my mountain bike.
Re: fullsac rear headpipe
« Reply #1 on: July 22, 2009, 04:36:51 PM »

Jim, looking at the number of views of your question without replies, I suspect you may need to ask a clearer question.    :nixweiss:   I am easily confused so take my comment with a ton of salt.  I've swapped out three sets of cores and drilled the cats so maybe I can help.  Jim Kerr also posted threads which were very helpful and had photographic instructions. 

Removing a Catalytic Converter form 09 CVO Road Glide

Installing Fullsac Baffles on 09 CVO Road Glide

Also see here:

Modifying the stock headpipe for more power!
Logged


"We've got some tall tales we love to tell.  They may not be true but we sure do remember them well." 
 Sawyer Brown

When you come to a fork in the road... take it!

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2378
  • 65 FLH 93" + others
Re: fullsac rear headpipe
« Reply #2 on: July 22, 2009, 07:50:58 PM »

any of you guys that have done this swap or r and r your rear pipe got any pointers, just ordered my modified pipe and was wondering if you found any tricks or snags
Thanks

Can you be a little more precise of just what you ordered? Maybe we can help.
Logged
HOGMIKE

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4814
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: fullsac rear headpipe
« Reply #3 on: July 22, 2009, 08:43:00 PM »

Jim might be asking of Fullsac's true dual head pipe for pre 09 Touring bikes that eliminates the crossover and you put in their pipe on the rear jug to make true duals.  If that's the case, the hardest part is seperating the crossover pipe from the front pipe and lh pipe.  I believe there is a how to on their website.  Let us know so someone can help.
Logged

jiml

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 83
Re: fullsac rear headpipe
« Reply #4 on: July 23, 2009, 10:50:14 AM »

sorry guys, I ordered the modified stock headpipe with the cat cut completely out, I will be swaping this out for the stock one and shipping the original one back. I was just wondering if any one has done this, if they had any pionters on the swap or input on the performance or fit and fininsh of the modified pipes. thanks
Logged

Highwaystar

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 597

    • CVO1: 06 SE Fat Boy
    • CVO2: Blown 150HP 09 SE Road Glide
    • CVO3: No need to go further!
Re: fullsac rear headpipe
« Reply #5 on: July 23, 2009, 10:50:41 PM »

Unplug the O2 connectors, Remove the right floor board, unbolt the stock system starting with the mufflers, Then reassemble. The cross over simply r&r's with a soft tube gasket.  :drink:
Logged
HWStar - Pro Charger; 153 hp 136 ft lbs, Jackpot header, 2-1/4 Fullsac's, TTS and PC-V with auto-tune, Dynojet Quick shifter, Xenon HI/low.

LarryB

  • Tennessee Squire
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3656

    • CVO1: 09 FLTRSE3 The Grey Ghost
Re: fullsac rear headpipe
« Reply #6 on: July 24, 2009, 07:22:11 AM »

what kind of bike is this going on? if removing the O2 sensors you'll need a special tool from HD to do this, do not use a wrench. i made one myself but thats just me. other that this, make sure the head pipes are seated in the gasket well, (get new gasket) and make sure you torque it. the headpipe that is
Logged
Take it Easy Greasy Cuz it's a long walk home.

Did I shave my head for this?

jiml

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 83
Re: fullsac rear headpipe
« Reply #7 on: July 24, 2009, 06:29:05 PM »

tell me about this special wrench its going on an 09 SEEG
Logged

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4814
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: fullsac rear headpipe
« Reply #8 on: July 24, 2009, 10:51:19 PM »

tell me about this special wrench its going on an 09 SEEG

I think you will be able to remove your old headpipes and then slide a boxed end wrench over the wire connector of the sensor and then remove the 02 sensors.  If not, go to Autozone etc and buy you a 02 sensor socket (which is split down the side for the wire to pass thru.  Put antiseize on the threads when you reinstall the sensors in the new pipe(s)..
Logged
 

Page created in 0.24 seconds with 24 queries.