Topic: how to make the stock seeg back rest comtfortable (Read 1876 times)

tank146 · « **on:** August 20, 2009, 08:50:17 AM »

Hi guys,

Any ideas on making the stock seeg backrest more comfortable? Around town I am fine, went on a 2 hour ride last night, this mornikng my lower back is killing me.

Thanks
Tim

Cvostu · « **Reply #1 on:** August 20, 2009, 06:59:14 PM »

I leaned the angle of the bracket back. I cut off the ends after the second set of holes then put a half inch spacer on the piece that attaches near the battery. Need a longer bolt also. Much better and easy to do. Good luck.

Cvostu · « **Reply #2 on:** August 20, 2009, 07:02:19 PM »

If you don't cut off the ends of the bracket,they will hit the rear fender and damage the paint. FWIW.

tank146 · « **Reply #3 on:** August 20, 2009, 10:41:15 PM »

Back rest angle seems ok, the damn backrest is so fricking hard though, maybe get it padded?

Cvostu · « **Reply #4 on:** August 21, 2009, 11:56:08 AM »

Don't think you can get the stock one padded. They have several others in the P/A catalogue. You may want to loos at some of those. Some other one's are more padded than others.

tank146 · « **Reply #5 on:** August 22, 2009, 08:33:46 PM »

Hey Stu,

Can you send me a picture of your backrest mod you made?

shermta@shaw.ca

Thanks
Tim

spydglide · « **Reply #6 on:** August 24, 2009, 08:17:29 PM »

Quote from: tank146 on August 22, 2009, 08:33:46 PM

Hey Stu,

Can you send me a picture of your backrest mod you made?

shermta@shaw.ca

Thanks
Tim

or maybe post the pics on here since we'd all like to see them.

har! spyder

Twolanerider · « **Reply #7 on:** August 24, 2009, 10:37:16 PM »

Are you pushing against the backrest too hard? If so have you moved it back?

Most of those seemed to come from assembly with the bracket all the way forward. Moving it all the way back can give you a lot more room and make it more comfortable. The stock seat still suck likes rocks in space. But it's better for most if the backrest doesn't have you in compression.

Cvostu · « **Reply #8 on:** August 24, 2009, 10:50:22 PM »

here's what I did

Cvostu · « **Reply #9 on:** August 24, 2009, 10:51:50 PM »

here's another

Cvostu · « **Reply #10 on:** August 24, 2009, 10:52:51 PM »

spydglide · « **Reply #11 on:** August 24, 2009, 10:54:46 PM »

Did you have to modify the seat (where the backrest goes thru)?

spyder

Cvostu · « **Reply #12 on:** August 24, 2009, 10:57:57 PM »

no>> I used the same holes that I had originally mounted the bracket to the fender.. It's very comfortable and I can last all day without any problems,,

Cvostu · « **Reply #13 on:** August 24, 2009, 11:05:55 PM »

here it is with the seat back on.

Author Topic: how to make the stock seeg back rest comtfortable (Read 1876 times)

tank146

how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

tank146

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

tank146

Re: how to make the stock seeg back rest comtfortable

spydglide

Re: how to make the stock seeg back rest comtfortable

Twolanerider

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

spydglide

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable

Cvostu

Re: how to make the stock seeg back rest comtfortable