www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: SE 255 in a 96"?  (Read 1120 times)

0 Members and 1 Guest are viewing this topic.

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
SE 255 in a 96"?
« on: August 31, 2009, 05:45:51 PM »
Anyone have any experience or first hand knowledge with the 255s in a stock 96"?
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

Herko

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: SE 255 in a 96"?
« Reply #1 on: August 31, 2009, 06:59:54 PM »
Yep.
http://harleytechtalk.org/htt/index.php/topic,12133.0.html

Guys that ride dyno sheets may say nay to the 255's as a bolt in for a 96.
Guys that ride the bike say to yes the 255's as a bolt in for a 96...they really like them.
A good tune helps of course.

Logged

moscooter

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1270
Re: SE 255 in a 96"?
« Reply #2 on: August 31, 2009, 07:18:32 PM »
 :cherry:
I believe I have a set of those for sale.............let me know if any interest.
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: SE 255 in a 96"?
« Reply #3 on: August 31, 2009, 07:27:12 PM »
Quote from: Herko on August 31, 2009, 06:59:54 PM
Yep.
http://harleytechtalk.org/htt/index.php/topic,12133.0.html

Guys that ride dyno sheets may say nay to the 255's as a bolt in for a 96.
Guys that ride the bike say to yes the 255's as a bolt in for a 96...they really like them.
A good tune helps of course.


That's what I have been hearing also. Looks pretty good for a bolt-in swap.
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: SE 255 in a 96"?
« Reply #4 on: August 31, 2009, 07:27:52 PM »
Quote from: moscooter on August 31, 2009, 07:18:32 PM
:cherry:
I believe I have a set of those for sale.............let me know if any interest.
Thanks for the offer, but I already have a set from my SERG3.
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
Re: SE 255 in a 96"?
« Reply #5 on: September 01, 2009, 07:44:45 AM »
More torque than stock , very smooth , drops at 4000 , but due to the low overlap you still have the heat problem.
 
After 17K with mine , I'm looking at a 54H

Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

Herko

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: SE 255 in a 96"?
« Reply #6 on: September 01, 2009, 08:21:03 AM »
Quote from: nidan on September 01, 2009, 07:44:45 AM
More torque than stock , very smooth , drops at 4000 , but due to the low overlap you still have the heat problem.

Good tune, heat problem resolved.
Not sure I buy into the low overlap always means high heat theory.
Logged

seroadglide

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: SE 255 in a 96"?
« Reply #7 on: September 01, 2009, 06:21:28 PM »
Yep ride dyno sheets everbody wants top end power in a bagger and to keep that intake valve open as long as possible with stock compression so that the motor takes longer to rev out,but hey now you got 10 more horses at 6k with stock gearing awsome!!!!
Logged
 

Page created in 0.214 seconds with 21 queries.