Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[CVOStreetglide]

2/16-- I just got back form the dealer and the factory rep agreed with me and had them order the parts. They wanted me to know that it may take awhile though--3 weeks up to 2 months. I don't care I am on record and can now wait it out.  

I'll let everyone know when the job is completed.  

Well today is 3/9 just over 2 weeks later and I just returned from the dealer and having the above replacement parts installed.

Everything came out perfect.

So now I can go back to enjoying this fabulous bike and the spring weather that just arrived this week.  

THANKS HARLEY-DAVIDSON for stepping up and doing your usual GREAT JOB!!!  

[JCZ]

Well today is 3/9 just over 2 weeks later and I just returned from the dealer and having the above replacement parts installed.

Everything came out perfect.

So now I can go back to enjoying this fabulous bike and the spring weather that just arrived this week. 

THANKS HARLEY-DAVIDSON for stepping up and doing your usual GREAT JOB!!!   

Now that's good news and much faster than you were thinking (and faster than I've ever heard of CVO paint being replaced!).

[spydglide]

kudos all around.  har.  spyder

[Badger Mike]

Can anyone post a copy of the recall notice?  I've heard nothing from my dealer on this.  Thanks.

[Mr. Wizard]

Can anyone post a copy of the recall notice?  I've heard nothing from my dealer on this.  Thanks.

Mike...  Click Here and enter your vin #. It will tell you if your bike has the tank recall. I've got a copy but it is too big to attach. PM your email addy and I'll shoot you this faded copy.

I took mine in for the 1K yesterday and the SM said my SESG wasn't a part of it, computer didn't print out the SB for my vin. Uhhhh, no...  try again. Yep, he found it. I guess HD is having issues with their computer software. Wonder if it was the same guy that designed the seat?

Also, for you guys that have sticking throttles. I could use mine like cruise as well. Just loosen the screws for the switch cover and the two screws that clamp the master cylinder on, wiggle the throttle and switch cover back a click, re-tighten. My guess is the builder smacked it his palm before tightening it all up. It forced the end of the handlebar to rub the bottom of the grip. Fixed mine right up.

[Badger Mike]

Thanks, looks like I may be good as nothing popped up but the service schedule for the 1,000 mile service.  I have 9 miles on my bike right now; still winter here

[BLU Bike]

I placed all the issue I could catch from the posts on one sheet, hope this helps. I didn't know all the resolutions though.

I'm going to use it to check my bike, if anyone can place this somewhere so we can add to it...

[JCZ]

Copy and paste works great...........


However, it's not to say that we've all had all these issues.  I'm more inclined to believe that it's not even the majority of SESG owners.  I haven't had any of the issues listed.  But then again, I've got 10k miles on a six month old bike......maybe I'm spending to much time riding and not enough time looking at it. 


Seat gap at tank   Replace seat, extend mounting tab
Clutch   Bleed system
Paint flaws   Replace parts
Fairing gasket seal to short   Replace gasket/remount
Speaker connector loose   Tighten properly
Loose bolts/Improper torque   Check all fasteners
Shock leaking oil   Replace shock
Fork leaking oil   Replace seals
Fuel lid rattle   Replace with locking lid
2 piece Eagle on tank   Replace tank
Ambient air guage not working   
Primary oil leak   Replace seal
Left turn signal short   
High oil pressure   
Haze in headlight   
Clacking noise   
Throttle sticking   
Seat does not line up with adjustable riders backrest   Replace seat

[miker]

Looks like pretty much any HD punch list...

[Badger Mike]

Either way, it's a great list of things to look over on your bike to make sure that things are the way they should be.  Thanks for the list

[CVOStreetglide]

Copy and paste works great...........


However, it's not to say that we've all had all these issues.  I'm more inclined to believe that it's not even the majority of SESG owners.  I haven't had any of the issues listed.  But then again, I've got 10k miles on a six month old bike......maybe I'm spending to much time riding and not enough time looking at it. 


Seat gap at tank   Replace seat, extend mounting tab
Clutch   Bleed system
Paint flaws   Replace parts
Fairing gasket seal to short   Replace gasket/remount
Speaker connector loose   Tighten properly
Loose bolts/Improper torque   Check all fasteners
Shock leaking oil   Replace shock
Fork leaking oil   Replace seals
Fuel lid rattle   Replace with locking lid
2 piece Eagle on tank   Replace tank
Ambient air guage not working   
Primary oil leak   Replace seal
Left turn signal short   
High oil pressure   
Haze in headlight   
Clacking noise   
Throttle sticking   
Seat does not line up with adjustable riders backrest   Replace seat

JCZ good job on the summary list. We will need to stay on top of these issues. I forgot to look did you add the brake master cylinder one that just got a bulletin??

ALSO: Did you see my post on the Kurakyn 9182 license tag frame and the voltage drop from the led tag light? It keeps the security key light on constantly on the dash kinda like the swap out for Kury lights. 

Regards

Jerry 

[worshipduder]

JCZ good job on the summary list. We will need to stay on top of these issues. I forgot to look did you add the brake master cylinder one that just got a bulletin??

ALSO: Did you see my post on the Kurakyn 9182 license tag frame and the voltage drop from the led tag light? It keeps the security key light on constantly on the dash kinda like the swap out for Kury lights. 

Regards

Jerry 

I didnt know Kurakyn 9182 license plate was having that issue. is there a thread on that? I was just about to order one and certainly dont need it messin' with my electrical

thanx

[WestCoastRuss]

JCZ good job on the summary list. We will need to stay on top of these issues. I forgot to look did you add the brake master cylinder one that just got a bulletin??
..................................................................................

I missed this bulletin.........is the info here at CVO??

[JCZ]

Looks like pretty much any HD punch list...

Well, actually the punch list has gotten a lot smaller since the flathead, panhead, shovelhead days!  You know that first hand, don'tcha Mike!

[CVOTequila]

Well, actually the punch list has gotten a lot smaller since the flathead, panhead, shovelhead days!  You know that first hand, don'tcha Mike!

Based on this list I got away clean, I have only had a few of these issues and they have been fixed......Also check to make sure your fairing cover is not contacting your fuel tank!