Well, I did place the TTS in after trying to read and prepare . . . Had to call Steve who gratiously helped me over the phone having a beer and later doing dinner. ( I called several times) My problem was hooking the laptop to the adapter... No all is fine... the hoops that I went through to get there still was long for a wanna be installer ... Had to find the correct COM port that was designated by the Device manager in the Settings rather than going through all of the available COM ports. Reading helps, but that's another short on my part ... I thought I read enough ... Then my battery was not strong enough to load... So I'd advise those like me to trickle charge when doing this ... It is possible to do it sooner than what I went through, but I know there are more individuals like me than not ... Saving the data was a cool idea to do in multiple places and also on a thumb drive ...
Lots of gratitude to Steve who helped me me mega time ... It was especially "high customer support" that he immediately sent my mapping over e-mail so that I could install ... BTW the disc is just the beginning of the beginning, you have to update the updates before installing your customized map...the details are covered when ordering from Steve...he uses the Stage one with the diameter core and the type of AC used...Gotta recommend the Arlen Ness AC with the existing SE Air cover... Sleek and easier for detailing the motor behind it ... Never knew that and so much neater to maintain without having those oil tubes coming off from the frame when cleaning ...
Now to drive it out today ....
Aloha,
Techie