Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[5.56mm]

I don't have the same headlight then... Mine has two bulbs...

[Wheelsnkeels]

I don't have the same headlight then... Mine has two bulbs...

So does mine.
It goes over the factory ring at first I didnt think it would fit it?
It was tight but it fits, when completed there is a smal gap at the bottom

[Capo]

So does mine.
It goes over the factory ring at first I didnt think it would fit it?
It was tight but it fits, when completed there is a smal gap at the bottom

I tightened it to make the gap realllly small-careful I also stripped the effin phillips head-

[5.56mm]

Ok Thanks a lot guys!!!  I figured it out by myself yesterday...finally.

BTW, I'm still working on my mods before I take some pictures, I'll keep you posted!

[smkblwr]

sgtbuck looking good. love the black trim rings on the lights, did you have those headlight rings power coated or are they OEM part?

[sgtbuck]

ebay

[sgtbuck]

Try this
http://cgi.ebay.com/ebaymotors/GLOSS-BLACK-7-FRENCHED-HEADLIGHT-TRIM-RINGSOFTAILS_W0QQcmdZViewItemQQhashZitem563da8b42cQQitemZ370401653804QQptZMotorcyclesQ5fPartsQ5fAccessories

[5.56mm]

See this...

http://www.cvoharley.com/smf/index.php?topic=50018.0

[smkblwr]

thanks guys, guess powder coater here i come.

[iski]

I tightened it to make the gap realllly small-careful I also stripped the effin phillips head-

I did that on the RK.  Found a replacement at the local hardware store.  Found them easier to take off/put back on after the first installation.  They seem to need to seat themselves some initially.  Tight fit on the SEULTRA but they fit.  Left them chrome, no black.

[warwick]

Hello every one.

Interesting discussion on powdercoating. And thanks for alerting me to possible ebay troubles.

I wonder if any of you guys with access to CVO parts manual got the PNs for the blacked out passing lamp bracket and passing lamps?

Thanks for your help.

[5.56mm]

Hello every one.

Interesting discussion on powdercoating. And thanks for alerting me to possible ebay troubles.

I wonder if any of you guys with access to CVO parts manual got the PNs for the blacked out passing lamp bracket and passing lamps?

Thanks for your help.

Warwick, there is no OEM blacked out passing lamp trim rings... You have to buy new chrome rings and have them powdercoated.  Good luck!!

[warwick]

Hi 5.56

I know the bike dosesnt come with black trim rings.

My question was about PN for the black passing lamp brackets and housings. 

 

[rmarion]

Good lookin ride.............

[blkcvo]

So far #451 is in the shop getting engine work done and some more powder coated parts and diamond cut heads should be done in about 3 weeks.