www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: K&N Filter 09 CVO RG  (Read 2818 times)

0 Members and 1 Guest are viewing this topic.

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
K&N Filter 09 CVO RG
« on: February 11, 2011, 06:07:03 PM »
Got the new K&N filter today, it does NOT fit the outer chrome air filter housing. When you try to tighten the center bolt it compresses the filter on both ends as the rubber outer gasket is larger than the chrome housing. I first tried to reshape the ends with an aggressive sanding block but that would take forever. Very carefully used the bench grinder, little at a time until the filter slipped into the chrome housing without effort. Finish sanded the outer edge with a old piece of 400 and if looks like it came that way. If you try to tighten the cover without doing this the filter will collapse.
« Last Edit: February 12, 2011, 09:35:16 PM by COR »
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: K&N Filter 99 CVO RG
« Reply #1 on: February 11, 2011, 06:45:18 PM »
What was K&N's response? :nixweiss:
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: K&N Filter 99 CVO RG
« Reply #2 on: February 11, 2011, 09:46:06 PM »
Bought it from HD, and I only assume it came from K&N, probably shouldn't have used K&N in the description. I am sure dealer would have replaced it, I wasn't complaining, just advising others to check before tightening it down and damaging it. Once I figured it out, only took about 5 minutes to make it fit. I gain alot more enjoyment from making it fit than contacting the manufacturer.
Logged

gordy

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 423
Re: K&N Filter 99 CVO RG
« Reply #3 on: February 11, 2011, 11:15:41 PM »
 :worthless:
Logged

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: K&N Filter 99 CVO RG
« Reply #4 on: February 12, 2011, 10:21:17 AM »
Dude, do you really think I stopped working, cleaned my hands, went inside and got a camera then took pictures with one hand while I worked a bench grinder with the other? Sorry but that will never happen. Not to mention that when you try to upload photos to this website they are the size of a giraffe as the site does not automatically resize.  Once again, sorry, but no photos.
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: K&N Filter 99 CVO RG
« Reply #5 on: February 12, 2011, 11:32:03 AM »
HD parts used to offer a thick gasket that had peel off sticky on one side...you could stick that to the filter cover and it would compress in the right places to make a good fit.  The gasket is/was about 1/2" thick and made of a material like a dense sponge.  Owners of the '06 SEUC had the same problem with the filter cover.  Blue loctite on the center bolt, and it fit right up.  I'm not sure if you're having the same issue, but if so, this is an alternative that works well.
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

YELLOWBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 799
    • VA


    • CVO1: 2009 CVO ROADGLIDE
Re: K&N Filter 99 CVO RG
« Reply #6 on: February 12, 2011, 05:29:09 PM »
Just had the K&N filter installed. NO problem what so ever.
Piece of cake.

YELLOWBIRD
Logged
2009 SCREAMIN' EAGLE CVO ROAD GLIDE FLTRSE3 117" PRO RACE
(1 OF ONLY 369 US) "LAST YEAR OF THE HAND BUILT"

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: K&N Filter 99 CVO RG
« Reply #7 on: February 12, 2011, 09:21:46 PM »
Yellowbird, you mistyped I assume, "Had it installed"??
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: K&N Filter 09 CVO RG
« Reply #8 on: February 13, 2011, 11:23:53 AM »

Can anyone actually verify that this new Harley part number is in fact a K&N part?  Or is it one of Harley's Chinese "equivalent" parts?

K&N doesn't list this part on their site, so I'm assuming they: (1) are very slow updating the catalog, (2) they didn't actually make this part, or (3) there is some kind of exclusive deal with H-D to market the parts only through Harley.  It will probably take awhile for this to sort out, so in the meantime I'm going with the conspiracy theory.  If the part will only be sold through Harley, you can safely figure on paying about $15 to $20 more than you would if it was available through the regular aftermarket stores.


Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: K&N Filter 09 CVO RG
« Reply #9 on: February 13, 2011, 04:01:39 PM »
Zannotti Motor has it listed for $50.00 and change.   Doc
Logged

UFO_HOG

  • Good Guys Wear Black
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 686

    • CVO1: 2009 FLTRSE3 Orange / Black
Re: K&N Filter 09 CVO RG
« Reply #10 on: February 13, 2011, 04:08:37 PM »
K & N does not have it listed on their web site, guessin' it's a look-a-like..........
Logged
You gotta be smart enough to understand the rules of motorcycling, and dumb enough to think the game's important.

motor1

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 656
  • Current Harley: 2022 FLTRKSE

    • CVO1: 2022 FLTRKSE
    • CVO2: 2022 FLRTXSE traded, 2015 FLTRUSE traded
    • CVO3: 2012 FLTRXSE traded, 2011 FLTRUSE traded
Re: K&N Filter 09 CVO RG
« Reply #11 on: February 13, 2011, 11:29:54 PM »
I called K&N, last week, they told me filter is only available through Harley. Rep looked it up with Harley part number, that leads me to believe it is a K&N part number.
Logged
Excuses are the conditions under which you have failed.

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: K&N Filter 09 CVO RG
« Reply #12 on: February 15, 2011, 10:08:33 PM »
Got the original Harley plain brown box out and read the label, it says K&N on it.
Sure Harley would not lie.
Logged
 

Page created in 0.219 seconds with 20 queries.