www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Installing my highway pegs on 2010 SEUC  (Read 1224 times)

0 Members and 1 Guest are viewing this topic.

Ed45

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 209

    • CVO1: 2010 FLHTCUSE5 Burnt Amber/Hot Citrus
Installing my highway pegs on 2010 SEUC
« on: February 27, 2011, 09:04:00 PM »
Yes, I have allowed a year to lapse before I install my highway pegs on my beloved SEUC. Never wanted to disrupt the look but it is time because I have some miles to do in Daytona and they will be put to good use. I want to take care cosmetically. Does everyone do the chrome to chrome connection? No Teflon tape or similar at the contact point? I have seen "covers" on the nut end that sticks out but my dealer hasn't a clue about a vendor who makes them. I'd appreciate advice on how to get this install done right. Leaving in a few days and would like to have them on...the right way. Thanks as always.
Logged

rbaker

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 770
    • AZ


    • CVO1: 2007 FXSTSSE
    • CVO2: 2010 FLHTCUSE5
Re: Installing my highway pegs on 2010 SEUC
« Reply #1 on: February 27, 2011, 10:58:38 PM »


Are these different from the stock ones??

if so, how about a picture?



 :pineapple:

Richard
Logged

bisounours

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7382

Re: Installing my highway pegs on 2010 SEUC
« Reply #2 on: February 28, 2011, 03:19:39 AM »

 :worthless:
Logged
********2007 FLHTCUSE2 Red/Black**********
 
     2008 FLHTCUSE3, White Frost and Silver Mist
             
                  2011 FLHXSE2, Stage1

2013 FLHRSE5   Crushed Sapphire with Cold Fusion GraphicsCrushed Sapphire with Cold Fusion Graphics

Rimjam

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 625
Re: Installing my highway pegs on 2010 SEUC
« Reply #3 on: February 28, 2011, 09:28:53 AM »
Chrome-to-chrome holds best.  Yes, it will mar the crash bar (engine guard for the lawyers) a little but you can always replace the crash bar & no one will know.
Logged

Ed45

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 209

    • CVO1: 2010 FLHTCUSE5 Burnt Amber/Hot Citrus
Re: Installing my highway pegs on 2010 SEUC
« Reply #4 on: February 28, 2011, 09:43:21 AM »
Quote from: rbaker on February 27, 2011, 10:58:38 PM

Are these different from the stock ones??

if so, how about a picture?



 :pineapple:

Richard
They are the stock ones that came with the bike and I will post pics after they are on. Any advice on how to cover that nut end??? Thanks
Logged

rbaker

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 770
    • AZ


    • CVO1: 2007 FXSTSSE
    • CVO2: 2010 FLHTCUSE5
Re: Installing my highway pegs on 2010 SEUC
« Reply #5 on: February 28, 2011, 09:50:29 PM »

Had to go and look at mine to see what that nut looked like.....

Here is a picture of mine and I think it looks good as it is.

Richard

 :pineapple:
Logged

Ed45

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 209

    • CVO1: 2010 FLHTCUSE5 Burnt Amber/Hot Citrus
Re: Installing my highway pegs on 2010 SEUC
« Reply #6 on: March 01, 2011, 09:54:32 AM »
I agree, it looks fine. A friend said someone made a nut cover (no wise cracks) but it seems totally unnecessary. Thanks to all.
Logged
 

Page created in 0.212 seconds with 21 queries.