Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cvoscoot]

Could someone tell me the best way to remove the little red reflector from back of 2012 sesg?It looks like if you were real carefull you could take sharp knife & cut off,but I'm afraid to try.

[Henrycm]

I used a hair dryer to heat the reflector then peeled it off.  A little rubbing alcohol took care of the remaining adhesive

Sent from my EVO using Tapatalk 2

[mjb765]

Could someone tell me the best way to remove the little red reflector from back of 2012 sesg?It looks like if you were real carefull you could take sharp knife & cut off,but I'm afraid to try.

You could try that if you put something behind it....or you could take the tailight assembly off and cut it that way. It's part of the base.

[Keats]

am emblem can be removed with very small fishing line behind it sawing back forth

[mjb765]

If things haven't changedf from 2011, the red reflector above the license plate is not held on with 2 sided tape....the reflector is part of the base of the lic. plate assy and must be cut off.

[cvoscoot]

Yes,it must be cut off ,just did not know if anyone had cut it off while still on the bike.

[LovemyCVOgirl]

Yes,it must be cut off ,just did not know if anyone had cut it off while still on the bike.

If you just loosen the plate and pull it away from the fender the reflector just falls off.  It is only held on with one of the bolts that attaches the plate to the fender.

[cvoscoot]

Thanks for the info. Got to get rid of that ugly thing!

[CowboyBagger]

Thanks for the info. Got to get rid of that ugly thing!

Switch to the Yaffee stealth III license plate bracket and it will really clean up the tail and solve your problem.

[cvoscoot]

Thanks,I will check it out.

[2018_FLTRXSE]

If you just loosen the plate and pull it away from the fender the reflector just falls off.  It is only held on with one of the bolts that attaches the plate to the fender.

yup... disconnect the license plate lite harness and pull it through.

[cvoscoot]

Have Stealth 111 ordered,thanks for info!

[mjb765]

Have Stealth 111 ordered,thanks for info!

That's the way to go!!!  I waited months to get mine when they first came out--but it was worth it.

[Rocketman69]

I like the idea of the Yaffe Stealth plate holder....but I just can't stand that oval window.  Why the hell don't they offer it with a full-view window??

[cvoscoot]

I seen that also,may have to move my exp. sticker over a little so it can be seen.