Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Cat Eye]

Maybe a silly question.....does the 58TB work with the Cruise Control?

[Unbalanced]

The SE Flyby wire 58 does work with cruise.

The HP Inc cables and flyby wire also work with cruise and so does the new S&S flyby wire

[FlaHeatWave]

'Often wondered what the differences were with just changing to the bigger TB, and tuning the TB in. If that is the case w/ your brother's 103, it seems a bigger difference than I would have expected...

'Was told by 3 Builders that I could get by with the stock throttle body / injectors, even on the 113, but since seeing on this site and elsewhere, that all the 113s have larger TBs / Injectors, I said me2. The SE 58mm is on its way to TR to be matched to the heads.

'Have a Ported (by FuelMoto) '09 TB w/ 0 mi. since Porting, if anyone is interested send a PM

[Ed Ramberger - One_Screamin_Eagle]

I thought you all might be interested to see this. It is his before and after dyno results after adding a 58 mm throttle body. We were both pretty surprised.

It is a 2012 103" Non-CVO Streetglide with 10.5-1 SE piston, SE heads (not sure which ones) and Woods 777 cams. The blue line is with stock throttle body and the red line is with 58 mm throttle body. Tuned by Jmack at Surdyke HD in Festus, MO. He's supposed to be one of the best tuners in the St. Louis area.

Brother said it runs significantly better.

Correction factor on that dyne sheet is STD - it needs to be set to SAE - then it will be more accurate - especially with humidity on base run at 17% and the final at 33%