www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: Changing Fork Oil With a Mityvac  (Read 6656 times)

0 Members and 1 Guest are viewing this topic.

Texas 103

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1483
  • FLHRSEI.ORG
    • TX

    • CVO1: 2016 "RGU"
Changing Fork Oil With a Mityvac
« on: November 23, 2006, 09:13:43 AM »
I thought I read somewhere that you can change out the fork oil on an "05 SEEG  with a Mityvac. I have the version that will pressure up as well as draw a vacum. Can someone enlighten me on this>> Thanks as always>> Greg    
Logged
Too Much of a good thing is just right !! Then more is always better

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: Changing Fork Oil With a Mityvac
« Reply #1 on: November 23, 2006, 11:20:53 AM »
Never heard of it.  Did mine the old fashioned way.  Brought it to Jim's (HD-Dude) and he took the front end apart...
Logged
2012 Black/Orange SEUC

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: Changing Fork Oil With a Mityvac
« Reply #2 on: November 29, 2006, 11:27:43 PM »
You used to be able to do that with a vacuum pump and a tool sold by Snap On, where you apply a vacuum through the air lines in the front end (at the top) and suction the fluid in through the bottom of the leg.  Long gone.  The newer bikes have a sealed type tube,  so what goes in one way,  comes out the other and there's no cheating..........Best way is to dissassemble the front end and do it right.


Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

SBB

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 16404
  • Go fast or go home! EBCM member # 2.36 .01%
    • CVO2: 2011.5 SEUC
    • CVO3: 2012 SERG
Re: Changing Fork Oil With a Mityvac
« Reply #3 on: November 29, 2006, 11:29:51 PM »
Quote
Never heard of it.
Logged

2012      SERG  "Nu Blue"
2018      Goldwing   
2003      HD Electra Glide Classic Silver and Black, of course!                
2 2012   Suzuki Burgmans
2018      Shelby GT350, 963 crank hp, 825 rear wheel hp

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Changing Fork Oil With a Mityvac
« Reply #4 on: November 29, 2006, 11:34:23 PM »
Quote



Nice HAMMER Jim! ;D ;D ;D ;D ;D ;D

I was waiting for someone to comment on that Chip ;D. When I first saw the pic I was wondering what it was on the floor for.  [smiley=nixweiss.gif] Then I remembered that I used it with the hand impact driver to break the 6mm slider bolts loose that hold the legs together.  ;)
Logged

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: Changing Fork Oil With a Mityvac
« Reply #5 on: November 30, 2006, 08:47:51 AM »
Greg-

Maybe this will work?


www.tooldiscounter.com/ItemDisplay.cfm?lookup=Kas440            

 [smiley=nixweiss.gif]
Logged

hogasm

  • Guest
Re: Changing Fork Oil With a Mityvac
« Reply #6 on: November 30, 2006, 08:55:26 AM »
Quote
Greg-

Maybe this will work?


www.tooldiscounter.com/ItemDisplay.cfm?lookup=Kas440            

 [smiley=nixweiss.gif]

Saw one of those in the Matco tool catalog yesterday. Salesman said he has never sold one to a motorcycle shop.
Logged

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: Changing Fork Oil With a Mityvac
« Reply #7 on: November 30, 2006, 11:45:28 AM »
Fellas,
    That's the Snap on tool I was talking about.  It won't work on our bikes.  You need to apply a vacuum to the top of the fork tube (usually from the back of the bike where you fill the front tubes with air....)  New bikes have sealed front tubes.......you can't get the fluid up in to the leg with that thing....I have one that I used on my '99 Ultra....won't work on our bikes..

_Beagle
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: Changing Fork Oil With a Mityvac
« Reply #8 on: November 30, 2006, 03:32:02 PM »
Screamin-

Thanks for clearing it up.  Definitely makes sense.  Changing the fork oil is not that hard on ours anyway unless you do it like HD-Dude does it in disassembling the forks.
Logged

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: Changing Fork Oil With a Mityvac
« Reply #9 on: November 30, 2006, 03:47:39 PM »
Disassembling ensures that you get all of the old fluid out (since you can pump each fork) and the correct amount back in.
Logged
2012 Black/Orange SEUC

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: Changing Fork Oil With a Mityvac
« Reply #10 on: November 30, 2006, 04:04:23 PM »
Boatman,
    I would recomend that you dissassemble the front end...........takes better part of a day to do,   but you don't have to do it that often..........get a case of beer,  a good cigar relax and enjoy.... [smiley=drink.gif] [smiley=drink.gif] [smiley=drink.gif] [smiley=drink.gif]

_Beagle
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50580
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Changing Fork Oil With a Mityvac
« Reply #11 on: November 30, 2006, 04:35:40 PM »
Quote
Boatman,
 
Logged

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: Changing Fork Oil With a Mityvac
« Reply #12 on: November 30, 2006, 05:01:17 PM »
Amen................I can think of about a billion other things I'd rather do.........


_Beagle
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

ccr

  • SEEG Cult Senior Member
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6352
Re: Changing Fork Oil With a Mityvac
« Reply #13 on: December 01, 2006, 10:31:19 PM »
Imagine my dismay, a non mechaical type, that when I asked for the heavy SE oil to be added to my forks at first service.................... I after the painful tryout of bike before second service ............... the bike had 6 oz too much oil in forks.  Make sure your service guys know you have a SE SEEG and not standard. JMHO.  :(
Logged

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: Changing Fork Oil With a Mityvac
« Reply #14 on: December 01, 2006, 10:51:15 PM »
Hey Mrs.,
    It's one hell of a lot easier to get out than to get back in!!!!! [smiley=xyxthumbs.gif] [smiley=xyxthumbs.gif]

I can only imagine the ride though..........kinda like an old girder with tempered legs..........
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!
Pages: [1] 2  All
« previous next »
 

Page created in 0.221 seconds with 21 queries.