www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 4  All

Author Topic: tru-track clearance  (Read 6327 times)

0 Members and 1 Guest are viewing this topic.

Bungy

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 481
  • Keep your stick on the ice
    • AB


    • CVO1: '08 SEUC annie
tru-track clearance
« on: December 06, 2006, 12:36:24 PM »
Has anyone w/ an '04 SEEG installed the tru-track system? Does it hinder the use of a jack? I have to hold my bike vertical (or close to it) w/ one hand while I slide the jack under. I'm concerned that w/ the tru-track the jack may not fit at all. I'd go w/ the ride str8, but I can get a smokin' deal on a tru-track from a mech @ the local shop who bought a bunch of them.
Logged
I used to have a handle on life, but it broke.

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4821
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: tru-track clearance
« Reply #1 on: December 06, 2006, 02:21:51 PM »
Bungy-

I have the True track on my 05..  To use my jack, I run the front tire up on a 2X4, slide the jack under so the rear lift arm is under the True track/cross brace, put a 3/8" board under the front lift arm and lift with no problems.  The True Track is a quality piece.
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: tru-track clearance
« Reply #2 on: December 06, 2006, 06:17:18 PM »
Quote
Has anyone w/ an '04 SEEG installed the tru-track system? Does it hinder the use of a jack? I have to hold my bike vertical (or close to it) w/ one hand while I slide the jack under. I'm concerned that w/ the tru-track the jack may not fit at all. I'd go w/ the ride str8, but I can get a smokin' deal on a tru-track from a mech @ the local shop who bought a bunch of them.

Bungy,
I would be very interested in a smokin' deal on a Tru-Track if you are at liberty to share the details.

Thanks
« Last Edit: December 06, 2006, 06:18:41 PM by hdfr120 »
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: tru-track clearance
« Reply #3 on: December 06, 2006, 06:45:28 PM »
Quote

Bungy,
I would be very interested in a smokin' deal on a Tru-Track if you are at liberty to share the details.

Thanks


Ditto. BTW, let's see how many people want it. Maybe we could negotiate a better deal. I'd like to install one as well. Should we start a poll to see how many takers we'll get? Hoist!
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

Bungy

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 481
  • Keep your stick on the ice
    • AB


    • CVO1: '08 SEUC annie
Re: tru-track clearance
« Reply #4 on: December 06, 2006, 09:31:32 PM »
Sorry!! He's only got one left! A customer of his bought a bunch for him & his buddies, had one left & didn't want it, so I told him I'd take it.
« Last Edit: December 06, 2006, 09:33:42 PM by bungy »
Logged
I used to have a handle on life, but it broke.

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: tru-track clearance
« Reply #5 on: December 06, 2006, 09:42:16 PM »
Quote
Sorry!! He's only got one left! A customer of his bought a bunch for him & his buddies, had one left & didn't want it, so I told him I'd take it.

Thanks anyway. I'll contact the mfr. and find out if they'll do volume discounts. I'l let you know. Hoist!
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50605
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: tru-track clearance
« Reply #6 on: December 06, 2006, 10:40:19 PM »
Quote

Thanks anyway. I'll contact the mfr. and find out if they'll do volume discounts. I'l let you know. Hoist!


We did group purchases of the Ride-Str8 device quite some time ago.  At that time I contacted both it's manufacturer and the True Tracks.  Ride Str8 offered a better price point.  In fact as a group we ended up doing (I think) three group buys of the Ride Str8.  The Ride Str8 guy can be a piece of work to deal with; but the part and price were ok.
Logged

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5482
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: tru-track clearance
« Reply #7 on: December 06, 2006, 11:38:28 PM »
Quote

Thanks anyway. I'll contact the mfr. and find out if they'll do volume discounts. I'l let you know. Hoist!

Hoist, I'm interested if you can work a deal.  Met the guy who developed this at Laconia this year.  Can't find his card right now but real interesting guy.  Looks like a quality piece.

Jerry
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: tru-track clearance
« Reply #8 on: December 06, 2006, 11:59:24 PM »
The clearance issue was the deciding factor for me. I went with the ride str8. Both products in my opinion do the same thing, add a third point to connect the engine to the frame, and work equally well.

Here are some links to prior discussions on the board about these products:

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1156032351/0
 
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1123085111/0
 
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1151877628/0
 
http://www.true-track.com
 
http://www.ridestr8.com/
 
Logged

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: tru-track clearance
« Reply #9 on: December 07, 2006, 07:11:03 AM »
Quote
The clearance issue was the deciding factor for me. I went with the ride str8. Both products in my opinion do the same thing, add a third point to connect the engine to the frame, and work equally well.

Here are some links to prior discussions on the board about these products:

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1156032351/0
 
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1123085111/0
 
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1151877628/0
 
http://www.true-track.com
 
http://www.ridestr8.com/
 


Jim, Don, thanks for the info. I'm going to follow up on both of these. Anyone have comments on their preference between the 2 , please post here and which one we should try to pursue. I have no experience with either and have no preference except, of course, to use the best one. I'd like to have this wrapped up soon so I can have one on order before my bike comes in. I plan on having this installed before I take delivery. Thanks, Hoist!
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

SBB

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 16404
  • Go fast or go home! EBCM member # 2.36 .01%
    • CVO2: 2011.5 SEUC
    • CVO3: 2012 SERG
Re: tru-track clearance
« Reply #10 on: December 07, 2006, 07:37:57 AM »
Quote


Jim, Don, thanks for the info. I'm going to follow up on both of these. Anyone have comments on their preference between the 2 , please post here and which one we should try to pursue. I have no experience with either and have no preference except, of course, to use the best one. I'd like to have this wrapped up soon so I can have one on order before my bike comes in. I plan on having this installed before I take delivery. Thanks, Hoist!

As Don said, the two acomplish the same thing.
The TruTrak does hinder lifting the bike somewhat and the Ride St8 guy is tough to deal with.
I've had the TruTrak and will probably go to the Ride St8 next for the same reasons as HD-Dude stated.
Remember, if all else fails, listen to Jim.


 [smiley=xyxthumbs.gif]
Logged

2012      SERG  "Nu Blue"
2018      Goldwing   
2003      HD Electra Glide Classic Silver and Black, of course!                
2 2012   Suzuki Burgmans
2018      Shelby GT350, 963 crank hp, 825 rear wheel hp

Chief

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5919
  • EBCM #4-3/8
Re: tru-track clearance
« Reply #11 on: December 07, 2006, 08:13:55 AM »
Has anyone put the Ride-Str8 on an 07 with the new board mounts?  I too like the looks of it over the TT, but wonder what to do about the new adjustable passenger boards.

Cheers!
Logged

Chief

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5919
  • EBCM #4-3/8
Re: tru-track clearance
« Reply #12 on: December 07, 2006, 08:18:21 AM »
Another point I'll mention, is although I can't say I've ever noticed the rear steer, I must have encountered it because of marks inside my left saddle bag from the lower "CUP" of my Progressive 440's rubbing on the bag.  It's more if like a gouge about 1.5" long.  I haven't measured the clearance, but I think there is about 3/8" nominal clearance between the pieces normally.  That's a good bit of sideways movement.  I never saw that with the OEM shocks, but they are thinner at the bottom than the Progressives so they have more clearance.

Cheers!
Logged

Chief

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5919
  • EBCM #4-3/8
Re: tru-track clearance
« Reply #13 on: December 07, 2006, 08:39:21 AM »
Gee, three in a row. Oh well, here goes.

Hopefully someone can clear this up for me...

The swingarm mounts onto the top of the oil tank and is not connected to the frame in any way right?
Logged

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4821
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: tru-track clearance
« Reply #14 on: December 07, 2006, 08:48:42 AM »
Harleydude-

Go to True track's website and read all they have there.  Then call the phone number and the fellow (Wil) will be able to answer any questions you have and probably talk your leg off.  Most members here have the Ridestr8 do to the group buys.  Personally, I would  rather have billet aluminum parts like TT's instead of Ridestr8's stamped steel.  With the TT I have no problems lifting or cornering-no clearance problems.  Both items try to accomplish the same thing.  If you have stock exhaust head pipes like me, the TT does not require exhaust removal for installation as the Ridestr8 does.  Good luck.  
Logged
Pages: [1] 2 3 4  All
« previous next »
 

Page created in 0.193 seconds with 21 queries.