Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Chief]

Chief, If it's the same floorboard support as prior year SEEG's SEUC's, the Kury pegs will bolt up to the support...it's the RH's that are the problem.  I have a simple solution for that problem that I can have machined.  It's a simple 5/8" spacer/pin to move the floorboard support out from the frame, made out of solid aluminum.  Get your powdercoat friend to do it in black, and voila, your Kury pegs will bolt on and have clearance.

See this thread to see if they will work for you:  http://www.cvoharley.com/smf/index.php?topic=10470.0

Looking at the image below, I realize the mount is not the same as the previous year's. The mount has the same 'foot' to attach to the bike, but 'swoops' downward to accomodate for the adjustable nature of the board. Based on this, I would have to replace the mount with the fixed version. The OEM parts could be ebay'd I'm sure as the adjustables are a $350 upgrade in the P&A Bible.



Chief

[Midnight Rider]

Looking at the image below, I realize the mount is not the same as the previous year's. The mount has the same 'foot' to attach to the bike, but 'swoops' downward to accomodate for the adjustable nature of the board. Based on this, I would have to replace the mount with the fixed version. The OEM parts could be ebay'd I'm sure as the adjustables are a $350 upgrade in the P&A Bible.



Chief

See what you mean...it's hard to tell from a drawing, and without seeing the new design with my own eyes, so wasn't sure if the thing was exactly the same or not.  Now I know.  Thanks

[Chief]

See what you mean...it's hard to tell from a drawing, and without seeing the new design with my own eyes, so wasn't sure if the thing was exactly the same or not.  Now I know.  Thanks

These supports have the wallowed out portion under the support, instead of on top. I assume the Kuryaken pegs use the wallowed out portion for indexing.

Chief

[Midnight Rider]

These supports have the wallowed out portion under the support, instead of on top. I assume the Kuryaken pegs use the wallowed out portion for indexing.

Chief

You are correct, sir.

I like your technical desciption..."wallowed"...or in the South, that would be "wallered"

[h2o-man]

I had the adjustable passenger foot pegs on my 02 Ultra and took them off when I sold it to buy my 06 CUSE. Much to my dismay they did not fit on the CUSE's mounting pegs. I had to decide whether to spend 170.00 for the pegs designed for the CUSE or 99.00 for Chrome Floorboard mounts for a standard Ultra. I went with the cheap version. Fit and finish is top notch and they function perfectly. So if anyone out there wants these CUSE floor board mounts, PM me.

[Chief]

You are correct, sir.

I like your technical desciption..."wallowed"...or in the South, that would be "wallered"

Please accept me apologies for butchering it as badly as I did. And to think I grew up in FL. But then again, that may be the reason.

Chief

[iski]

My wife loves those Kuryakyn adjustable pegs, and the only solution currently for the 07 Ultse is to go back to the narrower passenger board mount and spend a little less than a gazillion bucks to do it.

Otherwise, she will "wallow" a hole in the back on my head on one of the longer trips, I suspect.

[TCinVA]

Wonder if anyone has spoken with Kuryakyn about coming out with a new adj pass peg for the new style floorboard mounting arms?  Who knows, we might even be surprised to find out they're "in development"...
Anyone have any Kury contacts?
Tony

[iski]

Does any other manufacturer make an adjustable passenger peg similar to the Kuryakyns?  Not aware of any, but you never know unless you ask.

[EdKSr.]

My college friend has a son who work for them, he is on the phone right now trying to get the product manager.  He believes that they are in development and might be a numbered part.

[iski]

Ed - I would appreciate knowing if these pegs are in development.

I will hold off on the install for now, until I find out.

[IronButt]

Attempted to install the Kuryakyn adjustable footpegs for the passenger boards and they would not fit. 

http://www.kuryakyn.com/graphics/products/popup/7926-harley.jpg

Has anyone successfully mounted these to an 07?

Any suggestions/alternatives?

Have them on my 07 FLHTCUI and had them on my 04 . Maybe use FlHTCUI boards and or mounts???

[IronButt]

Attempted to install the Kuryakyn adjustable footpegs for the passenger boards and they would not fit. 

http://www.kuryakyn.com/graphics/products/popup/7926-harley.jpg

Has anyone successfully mounted these to an 07?

Any suggestions/alternatives?

Have them on my 07 FLHTCUI and had them on my 04 . Maybe use FlHTCUI boards and or mounts???

[AWS]

We talked to Kuryakyn in Daytona and Kuryakyn said they were working on the passenger hiway pegs and the pegs should be out in July or August that will fit the Jester.

[iski]

We talked to Kuryakyn in Daytona and Kuryakyn said they were working on the passenger hiway pegs and the pegs should be out in July or August that will fit the Jester.

Thanks. I spoke to them at Destination Dayton HD and must have talked to the wrong guy.

I will hold off on the install for now.  Considered trying to grind a pair to fit, but not sure if there would be enough material left.

Wife loves them on the 02 RK, misses them on the jester.