Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JCZ]

Can someone tell me what one should expect with a CVO 103 that is Dyno tuned with the SE air cleaner, Race Tuner and V&H Oval slipons? Or better yet post the actual results. Many thanks!!

All Pork, welcome to the site! [smiley=beerchug.gif]  Can't answer your question with exactness, but close.  I have an 04 SEEG (Screamin Eagle Electra Glide) with SE High Flow Air Cleaner, SE Race Tuner and the Vance & Hines Pro Pipe (2 into 1 exhaust) and had it dyno-tuned at Harley Davidson of Sacramento (see my dyno sheet in the dyno thread at about page 3).  I turned 100 HP and 104 ft. lb. of torque.  They seem to be pretty consistant there at Sac Harley.

By the way, the invitation at this link would be for you, too..................

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?board=event_other;action=display;num=1119150752

[AllPork]

JCZ,
Thanks for your reply and August invite. I'm scheduled to get my SERK dyno'd at RC Cycles in Hayward this Saturday. Bob Lobenberger (sp) will be doing the tuning. Not expecting to do nearly as well as those folks with the Pro Pipe but hope to be at least in the high 80's/low 90's HP wise.

Will let you know if I can make the ride in August.... thanks again.  

 

[ccr]

And JCZ, I wish you were closer to me, cause I'd sure like to hear what you'd say about the ride. It is so hard when no one you know has a bike that performs like this. I think Mr. We will be pushing to get his tuned soon.  Now I did loose the use of the race tuner, as John uses the Power Commander. Partly why it cost so much, but this guy really knows what he is doing. And the fact that he has a big enough heart to take me and my lowly bike in with the likes of the bikes he works on, I am very, very happy.   [smiley=laugh.gif]

[ccr]

I had a little misfortune which made me go out and get some good fortune.

[JCZ]

Now that's what I was talking about way back and I recommended somebody that "knows" how to dyno tune.  Those are almost exact numbers to mine (100 HP and 104 TQ).

[Twolanerider]

It's great to read that you're having so much new and better fun with the bike now Candy.  I'm sure everyone is glad to read that you're finally scoring some quality help and that the bike is finally feeling like it should for you.  It's just great news to see.  Have fun at the VA rally !

[hd2003-se2005]

Great report on your bike Mrs. We.

And how long will Mr. We let yours be faster?


.

[ridefar]

Does anybody know of a competent tuner I can connect with within a days ride of western New york. As always, thanks for helping me to spend my money. And remember, be careful out there.

[Fatboy]

Try Dr. Dyno, he's one of the best. Based out of Conn. but travels around to different shows and events......

I think his website is :

[Fatboy]

Not sure where he sets up in Daytona........I thought he stood out at the Volusia County Fair Grounds......

In Myrtle he sets up down in Murrell's Inlet in a

[MAVERICK]

I had the fuel injection mapped at Carls speed shop in Daytona Beach. 100 hp 103 ft lbs of torque. HOOKER 2 INTO 1 EXHAUST, HIGH FLOW AIRFILTER POWER, COMMANDER RIDE IT LIKE YOU STOLD IT!!!!

[SHRADER]

Hey folks,

Just returned from the

[spydglide]

Hey folks,

Just returned from the

[SHRADER]

Hey, SHRADER............what else did you do when you changed cams?

[Twolanerider]

Hey folks,

Just returned from the