www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: Passing Lamps Installed  (Read 11945 times)

0 Members and 2 Guests are viewing this topic.

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Passing Lamps Installed
« on: April 12, 2008, 03:53:49 AM »
I spent some time looking into passing lamps with the turn signals relocated with detachable windshield. This is the installed look that is so familiar to most of ya'all.

I always wanted passing lamps, and super brite type bulbs, so I am PIAA high and low beam, and a new brand name for the high output passing lamps. Nice lamps all the way around, lots of light now.


Pix to follow:


Mike K.
kona76
« Last Edit: April 12, 2008, 03:56:23 AM by kona76 »
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #1 on: April 12, 2008, 03:55:03 AM »
# 2 passing lamps
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #2 on: April 12, 2008, 03:55:50 AM »
Last one....
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

FNGw/08SERK

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2931

    • CVO1: 09 SERG
Re: Passing Lamps Installed
« Reply #3 on: April 12, 2008, 08:47:37 AM »
Quote from: kona76 on April 12, 2008, 03:55:50 AM
Last one....
Looks good Mike. Would you mind taking a pic of the flush mount caps on the tank. Been wondering how they look on that color? (i've got the same)

Thanks,

Howie
Logged

Lzyboy

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 262

    • CVO1: Black and Gray 08
Re: Passing Lamps Installed
« Reply #4 on: April 12, 2008, 09:40:16 AM »
another bike well done :apple:
Logged
Life time member VFW 7450 San Diego! Love your freedom, Thank a Vet!

RBFB

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 147
  • FLHRSEI.ORG
Re: Passing Lamps Installed
« Reply #5 on: April 12, 2008, 11:21:30 AM »
What are the part numbers on the PIAA bulbs? I would like to buy some. Where did you get them?
Logged

kb

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 732

    • CVO1: 08 serk twilight/cobalt blue
Re: Passing Lamps Installed
« Reply #6 on: April 12, 2008, 12:53:15 PM »
Looks real nice. I just added the same setup to my serk. IMO I never thought it looked like a FL without them. I would like to hear more on the bright bulbs when you have the time .KB
Logged
kb

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #7 on: April 13, 2008, 06:26:42 AM »
Quote from: RBFB on April 12, 2008, 11:21:30 AM
What are the part numbers on the PIAA bulbs? I would like to buy some. Where did you get them?

Give me a day or so to get the part numbers for accuracy. I know I did not use PIAA in the passing lamps, they were another brand, revealed soon.

In either case, both passing and driving lamps are very bright.

Mike K.
kona76
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #8 on: April 13, 2008, 06:37:10 AM »
Quote from: GH w/08SERK on April 12, 2008, 08:47:37 AM
Looks good Mike. Would you mind taking a pic of the flush mount caps on the tank. Been wondering how they look on that color? (i've got the same)
Thanks,

Howie

Howie,

Thank you. I had some pix already in my system. The one picture #112 has my flushmount setup with the gold V logo on it. I think the flush mount gets boring looking after a while, so I rev it up alittle.

Mike K.
kona76
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

ad2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 245
Re: Passing Lamps Installed
« Reply #9 on: April 16, 2008, 07:52:58 AM »
Mike K - do you have the part numbers for the bulbs and where you got them? Thanks.
Logged
2007 Screamin' Eagle Road King

Razor Red, Garmin 660 GPS, Passing Lights, Rear LED Run-Turn-Brake, Saddle Shields, Hard Bags, DeadCenter Fairing, XM Satelllite Stereo, Mini Beast II Air Horn, Neck Covers, C&C Fastback Seat, Wheel Dock Center Stand, Chubbys 575, 8" Recurve Shield

Capo

  • Sicilian Moto Capo
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1072
  • Yes it's fast and no you can't ride it!

    • CVO1: FLHRSEI2-SOLD Begrudgingly!
    • CVO2: FLHTCUSE3
Re: Passing Lamps Installed
« Reply #10 on: April 16, 2008, 08:23:49 AM »
Quote from: kona76 on April 12, 2008, 03:53:49 AM
I spent some time looking into passing lamps with the turn signals relocated with detachable windshield. This is the installed look that is so familiar to most of ya'all.

I always wanted passing lamps, and super brite type bulbs, so I am PIAA high and low beam, and a new brand name for the high output passing lamps. Nice lamps all the way around, lots of light now.


Pix to follow:


Mike K.
kona76

Mike I have been running Yellow sealed beam passing lamps since 2002 they really get noticed. Frequently cages pull to the right when I run up behind them. Ride Safe! :coolblue:
Logged

Rinehart True Duals
Rich's Custom seat
Zippers T-Max TBW
Stage 1
Wood TW-7H cam
SE Tapered push rods
Extronics HID digital H9 High/Low
Metzler 880's 10K + on the first rear
Howard's Horns
Chrome TP Hinges
JM Antennas
Clearview recurve
Arnott Air Suspension with QA1 shocks
Traxxion AK20's
True Trac
RJ's Original V-Twin Heat shields
WA plate - FLHTSE

Lea

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #11 on: April 17, 2008, 02:47:44 AM »
Quote from: ad2 on April 16, 2008, 07:52:58 AM
Mike K - do you have the part numbers for the bulbs and where you got them? Thanks.

ad2,

Sorry for the delay, I've been swamped with two CVO's taking all of my attention.

I don't know if you have received part numbers yet from another source. I will have them for you by tomorrow, April 18th.

Mike K.
kona76
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

ad2

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 245
Re: Passing Lamps Installed
« Reply #12 on: April 17, 2008, 04:07:47 PM »
Thanks Mike, I haven't heard from anyone else yet.
Logged
2007 Screamin' Eagle Road King

Razor Red, Garmin 660 GPS, Passing Lights, Rear LED Run-Turn-Brake, Saddle Shields, Hard Bags, DeadCenter Fairing, XM Satelllite Stereo, Mini Beast II Air Horn, Neck Covers, C&C Fastback Seat, Wheel Dock Center Stand, Chubbys 575, 8" Recurve Shield

kona76

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 638
  • Screamin' Eagle Rocks the SFV !!

    • CVO1: 2005 FLSTFSE Screamin' Eagle FatBoy Slate Gray with Metal Grind
    • CVO2: 2008 FLHRSE4 Screamin' Eagle RoadKing Black Diamond with Silver Mist & Ghost Flames
    • CVO3: 2010 Screamin' Eagle FatKing Monster CVO with Jims 124" 200 HP / 200 TQ (dreamin of)
Re: Passing Lamps Installed
« Reply #13 on: April 18, 2008, 02:34:43 PM »
Quote from: ad2 on April 17, 2008, 04:07:47 PM
Thanks Mike, I haven't heard from anyone else yet.

I sent you a PM.

Mike K.
kona76
Logged
FLSTFSE SE FatBoy & all the OCD Fixin's Top Notch Bar Hopper with hella HorsePower,Torque & Performance. Don't try this one at home, alone.
 
FLHRSE4 SE RoadKing Semi Stock Bagger for High Speed Power & Long Hauls, Two Up Comfort that Satisfies our Chrome Fixation Nation.

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: Passing Lamps Installed
« Reply #14 on: April 18, 2008, 03:40:14 PM »
Mike,
Mind just posting the PIAA bulbs #'s you used for your upgrades?  :nixweiss:Inquiring minds would like to know!  ;D

 :drink:
Joe
Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.
Pages: [1] 2 3  All
« previous next »
 

Page created in 0.103 seconds with 25 queries.