Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Wheelsnkeels]

Gerge Anderson makes one awesome tourpak relocator. I read what a nice piece he was making, but it far exceeded my expectations. Plus when I P.M.ed George about sending me one, he put it in the mail immediately. I got the relocator the same day he received my check. What a quality guy to deal with, and what quality work he does.

Nice Pic where is the tour pak relocator bracket in it?
 

[jimcb1]

i'am i missing something i don't any picture's

[Wheelsnkeels]

i'am i missing something i don't any picture's

This whole thread is about Georges Tour Pak Bracket and there is not a single picture of it. The only picture is of a 110 engine completely out of context.

[jimcb1]

i agree where are some pictures , i don't want to see a hunk of black steel between chrome, but if you can't see it then it is ok, but i would like to see some up close picture, unless they don't want you to see what you realy can see?

[jimcb1]

amazing nobody has pictures , got awful quiet here

[Wheelsnkeels]

Perhaps Harley or George should include a camera with their products?

[Fired00d]

amazing nobody has pictures , got awful quiet here

Sometimes searching will get you what you want....

For those that don't have his contact info..



Picture of the product installed w/o TP on top...

George Anderson Tour-Pak Relocator. If you have a 1999 to 2009 FLH series or a 2006 to 2009 Screaming Eagle, and you have a Tour-Pak that needs to be pushed back 1 1/4" or 2 1/2" to provide more room for your passenger, this is the product for you.

As many of you know, George only accepts checks, what we found is, there is a website www.tourpaks.com that is selling George's Tour-Pak Relocator, and they take PayPal, checks or credit cards.

Its the same product, just an easier way to purchase it.

If you want to buy on the internet you can buy the part here - Tour-Pak Relocator for H-D 2009 & 2010 FLH Series & Screaming Eagle (BTW - You'll notice right below the picture that this part is by George Anderson)

Some pictures of TP using the part in this thread - Anyone Move Forward a detachable Tour Pak with a Solo Seat?.

There were more but I didn't take a look at all of them.... all these came back w/searching "George Anderson kit" on this forum.

 
Ride Safe,
Fired00d
 

[Wheelsnkeels]

Thanks Dood

[Fired00d]

Thanks Dood

 
Ride Safe,
Fired00d
 

[NVTHIS]

George Anderson's Tour-pak Relocation Bracket.

[NVTHIS]

Take out the carpet lining and remove the 4 bolts that connect the tour-pak to the Chrome Mounting Rack. Be very careful at this point, it's best to have someone to hold the Tour-pak from falling. But you can do it on your own.

[NVTHIS]

This is the original chrome and black plate insert that the Tour-pak mounts too.

[NVTHIS]

Here is George's custom relocation bracket that is mounted directly to the original mounting rack. You will not need to remove anything to mount the new bracket. As you can see it takes 4 bolts to mount on. The two sets of threaded holes that you see are the two choices you have for position. The first set closest-ed to the bolts will give you 1 1/4" more room, and the second set will give you 2 1/2" more room.

[NVTHIS]

Different shot of custom bracket.

[NVTHIS]

Original seat position.