WAYNE: what is too high? I assume that the flat part of the beam should be about 2ft off the ground then if you are going off a wall measurement? How exactly did you determine or measure your height? I prefer a portion of the beam to be on the road about 2-3 car lengths in front of the bike? Typically that would be about 2ft off the ground against a wall 15ft away? I just called the HD dealer, who knows when i will get my bike back. They tied the clutch, ran a pressure test and everything checked out OK. They bled it again and now have the let the bike sit to see if it loses pressure. They won't start replacing parts until it fails again. I understand this process because HD won't pay them the time or cost of the parts unless they follow procedures. It could be a while before i get my bike back, if they decide to replace the clutch/master cylinder unit, they will have to order it because they don't stock the parts in black...thats 3-4 business days. I want to get these lamps on, but I guess I either have to wait, or maybe have them throw them on for free for making me go through this crap for the 3rd time?