www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: How do you remove outer fairing ?  (Read 10623 times)

0 Members and 3 Guests are viewing this topic.

Paul1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 282
  • CVO SESG2, FXDC

    • CVO1: FLHXSESG2
How do you remove outer fairing ?
« on: July 26, 2011, 11:42:58 AM »
Any tips on removing outer fairing, need to get access for fitting GPS. Thought I'd ask before I start, just in case I go about it the wrong way.
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23604
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: How do you remove outer fairing ?
« Reply #1 on: July 26, 2011, 12:08:11 PM »
About the easiest thing on these bikes......remove the screws that hold the windshield at the top of the fairing.  Then on the inside remove the screws on either out side edge of the fairing. :2vrolijk_21:

I remove the inside screws first, then the top windshield screws so that I can hang on to it as I remove the last one.
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

BUBBLEHEAD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 716

    • CVO1: 2021 FLTRXSE CVO Road Glide Bronze Armor
Re: How do you remove outer fairing ?
« Reply #2 on: July 26, 2011, 12:12:24 PM »
And dont drop it !!!! I remove the top middle screw last by hand after loosening so I'll have a good grip on the fairing.  If you've added spot lights cover them with a towell
Logged

Paul1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 282
  • CVO SESG2, FXDC

    • CVO1: FLHXSESG2
Re: How do you remove outer fairing ?
« Reply #3 on: July 26, 2011, 12:26:07 PM »
Cheers guys, much appreciated & I'll try not to drop it  :cucumber:
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: How do you remove outer fairing ?
« Reply #4 on: July 26, 2011, 12:38:21 PM »
If you've got a pair of old socks laying around, use them to cover the Aux lights, and a bath towel on the front fender.  As you pull it off, you can then let it rest on the socks while you unplug the headlight.  And don't overtighten when putting it all back together!
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23604
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: How do you remove outer fairing ?
« Reply #5 on: July 26, 2011, 01:42:36 PM »
Quote from: TCnBham on July 26, 2011, 12:38:21 PM
If you've got a pair of old socks laying around, use them to cover the Aux lights, and a bath towel on the front fender.  As you pull it off, you can then let it rest on the socks while you unplug the headlight.  And don't overtighten when putting it all back together!

Uhhh.....this is the Street Glide board Terry. ;D
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

mwg

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 254

    • CVO1: 2010 SESG "Beast"
Re: How do you remove outer fairing ?
« Reply #6 on: July 26, 2011, 01:58:05 PM »
Quote from: JCZ on July 26, 2011, 01:42:36 PM
Uhhh.....this is the Street Glide board Terry. ;D

My street Glide has aux lights...... I installed them just so I would have a place to rest the outer fairing while I unplug the headlight!!! ;D
Logged
RLTW

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: How do you remove outer fairing ?
« Reply #7 on: July 26, 2011, 02:16:04 PM »
Quote from: JCZ on July 26, 2011, 12:08:11 PM
About the easiest thing on these bikes......remove the screws that hold the windshield at the top of the fairing.  Then on the inside remove the screws on either out side edge of the fairing. :2vrolijk_21:

I remove the inside screws first, then the top windshield screws so that I can hang on to it as I remove the last one.
They no longer have the two (PITA) screws between the forks on the inside? Numbers 6 & 7 in picture below. :nixweiss:


 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

scorpionking

  • Guest
Re: How do you remove outer fairing ?
« Reply #8 on: July 26, 2011, 02:24:58 PM »
Quote from: Fired00d on July 26, 2011, 02:16:04 PM
They no longer have the two (PITA) screws between the forks on the inside? Numbers 6 & 7 in picture below. :nixweiss:


 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

those screws are fitted on my krypto flhxse2, i had to remove them when fitting my garmin gps
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50583
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: How do you remove outer fairing ?
« Reply #9 on: July 26, 2011, 04:21:40 PM »
Quote from: Fired00d on July 26, 2011, 02:16:04 PM
They no longer have the two (PITA) screws between the forks on the inside? Numbers 6 & 7 in picture below. :nixweiss:


 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Those two are still there Gary.  Took them out and replaced the screws with studs to make it easier in the future on Travis's 2011 not too long ago.
Logged

Ironhorse

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 4405
    • CA


    • CVO1: 2006 SE Ultra
    • CVO2: 2018 GoldWing DCT Airbag
Re: How do you remove outer fairing ?
« Reply #10 on: July 26, 2011, 05:00:22 PM »
Don't over tighten the screws when installing. You may pull the brass inserts out, or over stress the plastic mounts and they will break off with time and vibration.
Logged
"But men are men, the best sometimes forget" Shakespeare, Othello Act 2, Scene 3

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: How do you remove outer fairing ?
« Reply #11 on: July 26, 2011, 05:54:24 PM »
Everyone is right on with their tips.  The only thing I would add is when reinstalling the screws, start them several threads by hand.  Don't think they are started and then tighten with a socket to force the issue as they can easily be started cross threaded.
Logged

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6809

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: How do you remove outer fairing ?
« Reply #12 on: July 26, 2011, 05:57:02 PM »
Quote from: Twolanerider on July 26, 2011, 04:21:40 PM
Those two are still there Gary.  Took them out and replaced the screws with studs to make it easier in the future on Travis's 2011 not too long ago.

Good idea :2vrolijk_21:  I will be doing that the next time my fairing is off.....
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: How do you remove outer fairing ?
« Reply #13 on: July 26, 2011, 08:09:05 PM »
Quote from: Twolanerider on July 26, 2011, 04:21:40 PM
Those two are still there Gary.  Took them out and replaced the screws with studs to make it easier in the future on Travis's 2011 not too long ago.
Ah hell... they are so much fun to go fishing for them when they drop ::)... one of the first times I took my fairing off I had to go get one of those extendable magnets to find one when I dropped it.. They are good for finding hiding places that you never thought existed on the bike. :sauer005:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

jcd520

  • Guest
Re: How do you remove outer fairing ?
« Reply #14 on: July 26, 2011, 08:24:25 PM »
On # 6 and 7 , put the bike on a jack(both wheels off the ground) , turn wheel to left , hold tire with foot , right side bolt is easily accessed with extension and torx driver. Repeat on left side.
Logged
Pages: [1] 2  All
« previous next »
 

Page created in 0.242 seconds with 25 queries.