Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Unbalanced]

Welcome to the Site JCharos,

Not exactly sure what you mean by right site.

[MObe]

Here are the Dyno results for the green machine.
The blue lines are the current setup.
The red lines are the 253 cams, SE air cleaner K&N air filter, race tuner and Rineharts.
 Current setup = TW 37G cams, Race tuner, SE air cleaner, K&N air filter, Vance and Hines true dual headers, Supertrapp 3" IDS mufflers w/10 discs/muffler, cometic 030 head gaskets, SE adjustable push rods.

[JR]

Here is my dyno sheets with Zippers 575 Lift Cams, Andrews Gear Drive, Zippers Pushrods, Fueling Oil Pump, Fueling Lifters, SE AC with K&N Filter,D&D Fat Cats 2-1 Exhaust System with Ghost Pipe, Zippers Thundermax ECM with Modified Map, Zippers Map, and baseline run was with SE AC with K&N Filter, SE Pro Performance Mufflers and Calibration Cartridge.

First sheet is comparing Baseline with Final run with Modified Zippers Mapping.

                                                                            JR [smiley=banana.gif]

[JR]

Next one is with Zippers Map for Cams, Exhaust, Thundermax ECM and SE Air.

[JR]

This one is with modified Map and Air/Fuel readings.

[Crawdaddy]

Finally got my custom map done on the SEEG.

[Sid8d]

Hey there fellow CVO dudes.....This is just my 2nd post and I'm sure how to post the pic so I will just have to tell you my dyno numbers. Max power 113.3 Max tork 111.4. The tork hits 100 at 2750 rpms while the horse power hits 100 at 4750 rpm. Seems to run real good. Its a VTX killer  > I'll try to post the dyno sheet from my work computor on my next post.

[JR]

Hey Sid8d! Warm welcome to this wonderful site! Here is a link that is located in F.A.Q. that may help you post your dyno sheet. http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1118675329 What kind of modifications have been done to your scooter? Oops, just noticed what you got in your signature. [smiley=xyxthumbs.gif]

                                                                        

[Sid8d]

Thanks JR, I will have to try again. Later it didn't work. Maybe if I snap a pic of it and save it into my pics. Now it is in my pics with some goofy program from scanning it. I will get it on here a figure it out.

[hd-dude]

Freedom Cycles Exhaust, PCIII usb, Stage 1 AC, Freedom Cycles FCC9 Cams


More info on the tune here:
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1148443054/0#0

[Kingsalmon]

Nice numbers Jim, Did Bob dyno it ? I heard they changed things around some. Do they still let you sit in and watch while they Dyno ?
When it comes to Dyno Tuning these guys really know what they are doing.

[hd-dude]

Nice numbers Jim, Did Bob dyno it ? I heard they changed things around some. Do they still let you sit in and watch while they Dyno ?
When it comes to Dyno Tuning these guys really know what they are doing.

Yep, Bob is the man....They took over another space in the strip that they are in and dedicated it to the Dyno. They recessed machine into the floor in the room. They have a huge fan drawing air through the room as well the normal fans on the bike. Its a trick setup [smiley=xyxthumbs.gif]

[JCZ]

Freedom Cycles Exhaust, PCIII usb, Stage 1 AC, Freedom Cycles FCC9 Cams


More info on the tune here:
http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1148443054/0#0

Those are some impressive numbers considering that you have stock heads! [smiley=xyxthumbs.gif]  When I get back from the east (and when I can scrape together a few pennies, dimes and nickels [smiley=nervous.gif]) I think I'll try those cams with my Race Tuner and V&H Pro Pipe and see what the numbers look like. [smiley=nixweiss.gif]

[hd-dude]

Those are some impressive numbers considering that you have stock heads! [smiley=xyxthumbs.gif]

[Kingsalmon]

What kind of cam is FCC9 ? Low, Mid, High etc, etc,
I need to know when and when not to try to keep up with you. I am told my 211 is mid to high.
Our numbers are really close. [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]